Steps to replace a small loader tire

[DIG-DOG]

1. Start the machine, look for a relatively flat and open site at close range, press down the boom lifting rod, use the boom support to lift the front wheel off the ground, and then support the side of the flash bridge near the burst tire with the support, and wedge the rear wheel (must cooperate closely with the driver to avoid personal injury).

2, using tools such as a crowbar, remove the stop ring and lock ring, and then check whether the tire liner and the outer surface of the wheel are adhered to (the tire is used for a long time, the liner and the outer surface of the wheel may be adhered to). If the support can be removed, the machine can be run slowly over a short distance until the liner is separated from the outer surface of the rim; Steering and high-speed driving are strictly prohibited to avoid damage to the inner tube. Then, the front wheel supports again.

3, in order to find, remove foreign matter and repair the tire, mark the relative position of the inner tube and the outer tire.


4. Use tools such as a crowbar to remove the tire from the rim. Be careful, gently cooperate, avoid being hit by tires, and protect the air door.

5. After the tire is stabbed by slender foreign bodies such as nails, if there is no obvious wound on the surface or the wound is small, the tire can continue to be used (because the tires of small loader are low-pressure tires, and the running speed is relatively slow); If the wound is large, it must be repaired (because the tire will be squeezed and rubbed when the machine is running, the inner tube will be damaged over a long period of time, and even the wound will get bigger and bigger, the inner tube will protrude, leading to the tire scrap).

Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com