Crusher users pay attention! These run-in period use skills are very important!

[BONOVO]

The so-called break-in period of the crushing hammer refers to the break-in period of about 60 hours after the hydraulic crushing hammer leaves the factory (also known as the break-in period). The reason why the crushing hammer has a running-in period is stipulated by the manufacturing factory according to the technical characteristics of the initial use of the hydraulic crushing hammer. The existence of the running-in period is to reduce the failure rate, and the rational use of the breaking hammer in the running-in period is an important link to extend its service life.

Do not think that the breaking hammer has a warranty period at will, let the breaking hammer load work! In this special period, we must do a good job of these skills, which can not only improve the efficiency of our later use of the hammer, but also extend its life.

1. Equipped with experienced operators, according to the equipment manual operation maintenance.

2. Pay attention to inspection and take precautions to prevent problems before they happen. Check the quality of hydraulic oil, lubricating oil and coolant frequently, and pay attention to check the tightness of the whole machine.

It is recommended that during the running-in period, grease should be added to the lubrication point for each shift (except for special requirements).

Do two points smoothly through the running-in period, the end of the running-in period does not mean the end of maintenance inspection, pay attention to the replacement of oil in daily use.

However, according to the current use of many people, some large crushing hammer users due to the lack of basic use of common sense, they do not pay special attention to the special technical requirements used in the running-in period of the new machinery, so they let their crushing hammer in a state of overload for a long time, which ultimately leads to the service life of the crushing hammer is not long and the efficiency is not high, and early obstacles appear. Thus affecting the whole process of the project.

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com