What do those letters and numbers on the loader mean?

[DIG-DOG]

What do those letters and numbers on the loadermean? The first thing to understand is the above code name and the meaning of the numbers, a correct understanding to let them know your intentions, in order to load the goods according to the data they give, which is conducive to the process of delivery. Then let's give you a specific introduction to what the letters above the loaderrepresent. Loader, has long been a new thing in the development of recent years, the number of loaders on the market is also increasing year by year, as we see more loader models are big trucks.

There are a lot of loaders on the big truck, the loading area of the loaderis not the same, the number of loaders is not the same, of which the loading size of the loader1 row is about. Loader four-wheel width, with four-wheel steering bridge basic width.

Do it according to an ordinary vertical car with the same sleeve and working wheel. The bench loaderis 70cm wide and the car height is at least cm. Cargo car sizes are 6, 7, 8, 9, 10,10 smaller, the loader pole according to the grinding can be done, from triangular steel, iron pipes to four corners of the three-in-one rubber fork.

Sleeve working wheels (that is, generally vertical wheels) most of the width on one side can reach 50 or 60 centimeters. The cargo box is 50cm wide, the cargo hold size is connected from 424 or 430 round holes, and 5, 5 or 6 axes are hinged and connected, and the new type with two axes and four corner wheels will be connected by several more shafts. The length of the small column is less than 90 cm.

There are 12 doors on the large cargo loader, the space of four doors to three doors is not enough, the four-door to load a round of goods is no problem, the four-door only simple loading and unloading function, as long as it does not carry personnel.

The width of the side ladder is 4-6 cm, and the loaderrow with insufficient width needs to install the side handrail. The radius of the outer circle around the bearing shaft is generally about 15-25cm.

The difference between the left door and the outer circle radius is about 15cm (sanding 30-35m).

The width of the left front armrest is about 9-12 cm. The outer circle radius of the left rear rear wheel is about 12-15cm.

The left rear box is about 5-6cm. The width of the box on the right side is about 20-25cm.

The outer circle radius of the right rear wheel is about 15-18cm.

The width of the right rear box is about 12-16cm.

Right front about 5-6cm. The width of the right rear box is about 15-18cm.

If there is only one axis on the right front side, the area can be placed 10 square meters, and the three axes occupy 15 square meters.

Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com