Precautions for small loaders in the running-in period

[BONOVO]

1, wear speed is fast

Due to the processing, installation and adjustment of the new machine parts of the small loader, the collision surface is rough, the contact area of the cooperative surface is small, and the external pressure is uneven. During the operation of the machine, the convex and convex parts of the surface of the parts are embedded and worn, and the worn metal chips continue to participate in the conflict as abrasives, which accelerates the wear of the collaborative surface of the parts. Therefore, the parts (especially the collaboration surface) are simply worn during running-in, and the wear speed is fast. At this time, if overload, it may lead to damage to the parts, forming the previous shortcomings.

2, poor lubrication

Because the collaboration space of the new device parts of the small loaderis small, and due to the reasons of the device, it is difficult to ensure the uniformity of the collaboration space, and the lubricating oil (grease) is difficult to form a uniform oil film on the conflict surface to avoid wear. Then the lubrication power is reduced, resulting in abnormal wear of machine parts in the early stage. In severe cases, it can form scratches or bite marks on the precise, coordinated surface of the resistance, which then leads to defects.

3, loose

There are deviations in the geometry and cooperative dimensions of the newly machined and installed parts of small loader. In the early days of use, due to the impact of shock, vibration and other alternating loads, as well as the influence of heat, deformation and other factors, coupled with the rapid wear of reasons, the original fastening parts are very simple to loosen.

4. Leakage occurs

Due to the loose and vibration of the machine parts of the small loaderand the influence of the machine heat, the sealing surface and pipe joints of the machine will leak, and it is difficult to find some defects such as casting and processing during the installation and debugging. However, due to the vibration and impact of the operation process, these defects are exposed as oil (water) leakage, so it is very simple to leak during the running-in process.

5, the operation mistakes

Because the structure and function of small loaderare not understood (especially for new operators), it is easy to form shortcomings and even mechanical accidents due to operational errors

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com