Maintenance sequence of wheeled wood grabber

[DIG-DOG]

Wheeled wood grabber is a machine used to grab and carry wood. Because it often works in harsh environments, it needs regular maintenance to ensure its normal operation and extend its service life. In this blog, we will introduce the maintenance sequence of wheeled wood grabbers to let you know how to better maintain your machine.

1. Cleaning

Wheeled wood grabbers often work in dirty environments such as mud, dust and sand. After long-term use, a lot of dust and dirt will be stained on the surface. Therefore, it is necessary to clean the machine. When cleaning, you need to turn off the power supply and hydraulic system of the machine first, and use a high-pressure water gun to clean the surface of the machine and the inside of the machine structure. Then use a clean soft cloth and warm water to wash the coating and equipment parts to prevent moisture and dust from entering the inside of the equipment.

2. Hydraulic oil replacement

Hydraulic oil is a key component for the normal operation of the machine. Therefore, hydraulic oil replacement is a necessary operation for maintaining wheeled wood grabbers. Hydraulic oil replacement cannot be carried out at will, and it needs to be replaced according to the requirements of the manual. When replacing, you need to drain the old hydraulic oil first to ensure that all the oil in the hydraulic system is replaced cleanly, then fill in new hydraulic oil and use a hydraulic pump for testing. The hydraulic oil replacement cycle is usually every 6 months.

3. Cleaning the radiator and air conditioning filter

The radiator and air conditioning filter are one of the key parts inside the machine. After long-term use, they are easily covered and blocked by dust and dirt, which in turn affects the working efficiency of the machine. Therefore, cleaning the radiator and air conditioning filter is a necessary step in maintaining the wheeled wood grabber. Cleaning the radiator and air conditioning filter can improve the ventilation effect of the machine and prevent the machine from being damaged accordingly.

4. Lubrication and tightening of hydraulic pipelines, wires and lubrication points

Hydraulic pipelines, wires and lubrication points play a very important role in the work of the machine. During the maintenance process, they must be lubricated and tightened. The choice of lubricating oil is very important and must be carried out according to the instructions. Prevent it from being too greasy and affecting the normal operation of the machine. When tightening the screws, you need to pay attention to the order and strength, and use a wrench or torque wrench to operate.

5. Regularly check electrical components

The electrical components of a wheeled wood grabber are an important part of its normal operation, so they must be checked frequently. When checking, pay attention to the wear and power failure of the wires, as well as any problems in the electronic system. It is recommended to check the electrical components once a month.

The above are the steps for the maintenance of a wheeled wood grabber, I hope it will be helpful to everyone. In daily maintenance, it is necessary to pay attention to regular cleaning, replacement of hydraulic oil, cleaning of radiators and air conditioning filters, lubrication and tightening of lubrication points and fastening screws, and regular inspection of electrical components. Only in this way can the normal use of the machine be guaranteed and its life be extended, while also ensuring work efficiency and safety.

Mini crawler excavator，Mini crawler excavator attachments，Excavator attachments，Crawler excavator，Mini excavator purchase

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com