Routine maintenance process of lawn mower

[BONOVO]

In the city life, we can see green plants and bright flowers on both sides of the road on the way to and from work or school. There are certain reasons for their vigorous growth, and we need to rely on our garden master to take care of them. In their work, the tool they often use is the lawn mower. Today, I mainly tell you about the maintenance procedures of the lawn mower.

First, the maintenance of the blade

1, regularly check the connection of the blade and the sleeve, when the blade hits other objects in use, it should be checked in time.

2. When grinding the blade, the original Angle and direction of the blade should be followed, and the grinding amount on both sides should be equal, and the static balance should be done after grinding.

3, before reinstalling the blade, the crankshaft end and the inner hole of the shaft sleeve should be coated with lubricating oil, the center screw bolt and the crankshaft screw hole should also be coated with some oil to prevent future corrosion and can not be removed.

4. If not used for a long time, the blade surface should be cleaned and coated with lubricating oil to prevent rust.

Second, the maintenance of the shell

The inside of the casing must be cleaned after each use to prevent the cut grass, leaves, sludge or other debris from adhering to its heart and producing rust.

Lawnmower manufacturers

Third, the maintenance of the lawn mower carburetor

In strict accordance with the requirements of the mower carburetor operation, repair and maintenance instructions, while paying attention to the following points:

1, under normal circumstances, the air filter should be cleaned once a day, when used in a very dirty environment, it needs to be cleaned every few hours.

2. The spark plug is cleaned after each use season. Re-adjust the spark plug gap at the arrival of each use season (check and adjust according to the model and spark gap in the lawn mower carburetor manual to prevent errors and affect the performance of the whole machine).

3, the lawn mower carburetor outer surface should be often wiped with cloth or brush to ensure clean ventilation.

Fourth, the rotating shaft of the walking clutch rod should be regularly injected with lubricating oil to prevent rust.

The front and rear rollers should be lubricated with light oil at least once each season.

Six, the driving mechanism of the walking part should be cleaned and replaced once after two years of operation.

7. Weeds, waste residue or dust should be removed from the shield every day to prevent damage to the engine due to overheating or speeding.

8. When not used for a long time, the gasoline in the machine should be drained to avoid deterioration of the gasoline and blocking the carburetor and other components.

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com