Maintenance points of loader accessories

[BONOVO]

1. Engine parts maintenance

Air filter

Check and clean the air filter regularly. When the air filter is clogged, it will cause insufficient air intake to the engine, affecting the engine's power output and fuel economy. According to the dust conditions in the working environment, the air filter element needs to be cleaned every 100-200 hours of work, and the filter element needs to be replaced every 500-1000 hours of work.

Oil filter and engine oil

Replace the oil filter at the prescribed time interval, generally every 200-300 hours of work. At the same time, check the oil level and quality of the engine oil regularly, select the appropriate engine oil brand according to the loader's manual, and replace the engine oil according to the prescribed time (generally every 250-500 hours of work) and seasonal changes.

2. Hydraulic system parts maintenance

Hydraulic oil pump and hydraulic motor

Keeping the hydraulic oil clean is the key to maintaining the hydraulic oil pump and hydraulic motor. Regularly replace the hydraulic oil, generally every 1000-2000 hours of work. At the same time, pay attention to check whether the pressure of the hydraulic system is normal. If the pressure is abnormal, it may be that the hydraulic oil pump or hydraulic motor is faulty.

Heilongjiang loader accessories

Hydraulic cylinder

Check whether the seal of the hydraulic cylinder is leaking. If leakage is found, the seal should be replaced in time. At the same time, pay attention to keep the hydraulic cylinder clean to prevent dust, impurities, etc. from entering the cylinder and affecting the normal operation of the cylinder.

3. Transmission system accessories maintenance

Gearbox

Regularly check the oil level and oil quality of the gearbox. Generally, check the oil level every 100-200 hours of work, and replace the gearbox oil every 500-1000 hours of work. At the same time, pay attention to whether the gearbox has abnormal noise during operation. If there is abnormal noise, it may be that the gears, bearings and other components inside the gearbox are faulty.

Drive axle

Check the oil level and oil quality of the main reducer, differential and other components of the drive axle. Generally, check the oil level every 100-200 hours of work, and replace the drive axle oil every 500-1000 hours of work. At the same time, pay attention to check whether the half shaft, wheel hub and other parts of the drive axle are loose or damaged.

IV. Maintenance of working device accessories

Bucket

Regularly check the wear of the bucket, especially the bucket teeth and blades of the bucket. When the bucket teeth are severely worn, they should be replaced in time to avoid affecting the digging efficiency of the bucket. At the same time, pay attention to check whether the connection parts of the bucket are loose. If there is any looseness, tighten it in time.

Boom and rocker arm

Check whether the structure of the boom and rocker arm is deformed, cracked, etc. At the same time, pay attention to check whether there is leakage at the connection parts of the hydraulic cylinder of the boom and rocker arm. If there is leakage, it should be handled in time.

keywords：multifunctional skid loader，Multifunctional skid steer loader attachments，Skid Steer Loader Attachments

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com