Pay attention to these when changing the oil of loader parts

[DIG-DOG]

Loader accessories, loader oil plays the role of lubrication, cooling, cleaning, rust prevention, etc. The correct use of oil is a necessary part of loader maintenance. So what should you pay attention to when changing the oil for loader accessories?

1. Remember to change the oil regularly for loader accessories

Oil products are equivalent to the blood of construction machinery, and each oil product needs to be replaced and maintained regularly. As a lubricant for the normal operation of the engine, the oil viscosity decreases after the oil is used for too long, and the lubrication and cooling are unstable, causing the temperature in the engine to be too high, and the cylinder piston to deform at high temperature. In addition, the impurities in the engine oil are filtered, and the oil filter core should also be replaced regularly.

2. Do not use inferior oil for loader accessories

When purchasing and choosing oil, do not buy inferior oil because of greed for small bargains, because the quality of oil directly affects the life of construction machinery equipment. Inferior oil makes the turbocharger lubrication unstable, wears too much, and the intake effect is not good. It is recommended that you choose the original factory or replace the pure original factory accessories.

3. Different grades of engine oil for loader parts cannot be mixed

Different types of engine oil have different chemical or physical additives added during the production process. Mixing different additives may cause chemical reactions. In addition, different grades of engine oil from the same manufacturer cannot be mixed. Don't be greedy for this small bargain.

4. Don't add more engine oil to loader parts

There are many misunderstandings when changing engine oil. The more engine oil you add, the better. Adding too much engine oil will cause a lot of harm. First, too much engine oil will reduce the engine output power and increase fuel consumption; secondly, adding too much engine oil may also damage the oil seal and cause engine oil leakage.

5. Add engine oil to loader parts in small amounts and multiple times

There is usually an oil dipstick on the engine. When adding engine oil, try to add it in small amounts and multiple times. Observe the oil dipstick after about a minute. The purpose of adding multiple times is to prevent adding too much engine oil.

multifunctional skid loader，Multifunctional skid steer loader attachments，Skid Steer Loader Attachments

Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com