What should I pay attention to when using a breaker hammer on an excavator? If I don't do it right, the excavator will b
Posted: Feb 5th, '25, 22:03
After installing the breaker on the excavator, there are some things you need to pay attention to, otherwise it will cause great damage to the excavator. Let's learn about it together!
After using the breaker, you should frequently change the hydraulic oil, and the hydraulic oil should be changed every 1,000 hours.
Excavator equipment, excavator manufacturer, Ningbo excavator
It is recommended to add an oil return filter to prevent impurities that have not been completely filtered from entering the hydraulic system and damaging the hydraulic pump.
When installing the breaker, you need to install an oil pipe at the reserved valve core, a crushing low-pressure sensor, and a crushing mode switch. This switch is generally installed under the key switch. The purpose of adding this switch is to make the hydraulic flow more compatible with the crushing mode.
What should I do if the breaker is slow? Check whether the breaker overflow valve is working properly and whether the main overflow valve pressure is normal. There is also a frequency modulation valve on the breaker to adjust the frequency. If the frequency is too fast, it will affect the piston oil seal in the breaker.
What is the situation when the breaker is weak? Check whether the nitrogen of the breaker is sufficient, check whether the low pressure sensor is around 3.5MP, 4.5V, and finally confirm whether the hydraulic oil is sufficient. If not, add it quickly.
The breaker can cause great damage to the excavator. It is needed in some special operations. It must be inspected and maintained to avoid not making money but damaging the excavator.
Buy a small excavator, buy a second-hand small excavator, buy excavator parts, sell excavator parts, buy a small excavator
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
After using the breaker, you should frequently change the hydraulic oil, and the hydraulic oil should be changed every 1,000 hours.
Excavator equipment, excavator manufacturer, Ningbo excavator
It is recommended to add an oil return filter to prevent impurities that have not been completely filtered from entering the hydraulic system and damaging the hydraulic pump.
When installing the breaker, you need to install an oil pipe at the reserved valve core, a crushing low-pressure sensor, and a crushing mode switch. This switch is generally installed under the key switch. The purpose of adding this switch is to make the hydraulic flow more compatible with the crushing mode.
What should I do if the breaker is slow? Check whether the breaker overflow valve is working properly and whether the main overflow valve pressure is normal. There is also a frequency modulation valve on the breaker to adjust the frequency. If the frequency is too fast, it will affect the piston oil seal in the breaker.
What is the situation when the breaker is weak? Check whether the nitrogen of the breaker is sufficient, check whether the low pressure sensor is around 3.5MP, 4.5V, and finally confirm whether the hydraulic oil is sufficient. If not, add it quickly.
The breaker can cause great damage to the excavator. It is needed in some special operations. It must be inspected and maintained to avoid not making money but damaging the excavator.
Buy a small excavator, buy a second-hand small excavator, buy excavator parts, sell excavator parts, buy a small excavator
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com