Loader two busy maintenance skills
Posted: Oct 27th, '24, 23:05
The torque converter can automatically change the turbine speed according to the load change, improve the driving ability of both ends, and is also a very important component.
After each shift, check the combination of torque converter and machine fastening, if loose, tighten in time. After every 100h of work, unscrew the fuel nut on the torque converter cover, and check the oil level height with the oil level ruler. The oil level height should be between the upper and lower lines of the oil level ruler. When measuring, both ends are required to be in a horizontal position; When the amount of oil is insufficient, add in time.
Lubricating oil is gear oil to ensure the cleanliness of gear oil, there should be no mechanical impurities in the oil, on the contrary, it will accelerate gear wear. When refueling, pay attention to the cleanliness of the refueling tool and the refueling port. Bolts loose, tighten in time; Pay attention to the tightness of each hydraulic component, check whether the "O" seal ring of the cylinder piston rod is damaged; Cleaning hydraulic oil filter, radiator; Check the hydraulic oil tank, clean the oil, remove impurities, and fill the hydraulic working oil.
It is necessary to clean the hydraulic system every quarter, take samples to check whether the hydraulic working oil is deteriorated, and replace it in time if there is a problem. Distributor safety valve pressure change; Whether the pins and bushings of each part are damaged; Whether the rotating mechanism and the mounting bolts of each part are loose; Replace necessary wearing parts.
After the end of the busy operation of the loader at both ends, the dirty oil is released while it is hot, and the appropriate amount of clean diesel is added. After several times of forward and backward, the diesel is released and the clean gear oil is added. Note: in different seasons, different specifications of gear oil need to be selected; In winter, use winter gear oil, in summer, use summer gear oil.
If the loader is suddenly power off when in use, be sure to turn off the power, sudden calls will cause unnecessary injury. During use, try to avoid failure and do good maintenance!
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
After each shift, check the combination of torque converter and machine fastening, if loose, tighten in time. After every 100h of work, unscrew the fuel nut on the torque converter cover, and check the oil level height with the oil level ruler. The oil level height should be between the upper and lower lines of the oil level ruler. When measuring, both ends are required to be in a horizontal position; When the amount of oil is insufficient, add in time.
Lubricating oil is gear oil to ensure the cleanliness of gear oil, there should be no mechanical impurities in the oil, on the contrary, it will accelerate gear wear. When refueling, pay attention to the cleanliness of the refueling tool and the refueling port. Bolts loose, tighten in time; Pay attention to the tightness of each hydraulic component, check whether the "O" seal ring of the cylinder piston rod is damaged; Cleaning hydraulic oil filter, radiator; Check the hydraulic oil tank, clean the oil, remove impurities, and fill the hydraulic working oil.
It is necessary to clean the hydraulic system every quarter, take samples to check whether the hydraulic working oil is deteriorated, and replace it in time if there is a problem. Distributor safety valve pressure change; Whether the pins and bushings of each part are damaged; Whether the rotating mechanism and the mounting bolts of each part are loose; Replace necessary wearing parts.
After the end of the busy operation of the loader at both ends, the dirty oil is released while it is hot, and the appropriate amount of clean diesel is added. After several times of forward and backward, the diesel is released and the clean gear oil is added. Note: in different seasons, different specifications of gear oil need to be selected; In winter, use winter gear oil, in summer, use summer gear oil.
If the loader is suddenly power off when in use, be sure to turn off the power, sudden calls will cause unnecessary injury. During use, try to avoid failure and do good maintenance!
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com