Small excavator installation arm rod and components precautions
Posted: Oct 27th, '24, 23:21
What should the small excavator pay attention to when installing the arm rod and components? The following explains several aspects that need to be paid attention to when installing the arm rod and components of the small excavator .
(1) Place the boom and the host connecting pin on it
(2) Next, the small excavator repairs and closes the boom cylinder pipe, and starts the line when the oil level in the hydraulic tank rises above the lower oil level.
(3) The engine and boom cylinder are telescopic, and the connecting pin between the boom cylinder and the main engine is inserted into the pin hole through the crane. Similarly, when a connection pin is installed between the bucket and the bucket cylinder, the tubing of the bucket cylinder is opened first.
(4) When disassembling the boom and arm assembly, the end of the boom cylinder and the piston rod of the boom cylinder must be fixed to the corresponding lifting ring with 12# wire rope to prevent the disassembly and transportation of the piston rod from stretching, bending or wearing.
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
(1) Place the boom and the host connecting pin on it
(2) Next, the small excavator repairs and closes the boom cylinder pipe, and starts the line when the oil level in the hydraulic tank rises above the lower oil level.
(3) The engine and boom cylinder are telescopic, and the connecting pin between the boom cylinder and the main engine is inserted into the pin hole through the crane. Similarly, when a connection pin is installed between the bucket and the bucket cylinder, the tubing of the bucket cylinder is opened first.
(4) When disassembling the boom and arm assembly, the end of the boom cylinder and the piston rod of the boom cylinder must be fixed to the corresponding lifting ring with 12# wire rope to prevent the disassembly and transportation of the piston rod from stretching, bending or wearing.
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com