How to better maintain loader accessories

[DIG-DOG]

With the continuous development of the domestic transportation and transport industries, the construction machinery of construction projects has also received attention and improvement in terms of safety. Loaders are earthwork construction machinery widely used in construction projects such as roads, railways, buildings, hydropower, ports, and mines. Generally, they work in relatively harsh working environments. In addition to normal wear and tear, the transmission parts of each part are also subject to vibration and impact loads, which aggravates the wear of the accessories and affects the service life and normal operation of the machine. In order to make the loader run, extend its service life, reduce the occurrence of failures, and improve productivity, timely technical maintenance and maintenance are required. The following editor of XCMG loader accessories will tell you about the regular maintenance methods of loader accessories:

First, after the machine has been working for about ten hours, the loader accessories should check the tightness of the hydraulic, transmission, and brake systems. Check the reliability and coordination of the brake system. Check whether the circuit system and electrical components can work properly. Check the oil level of the fuel tank, the water level of the water tank, etc. In addition, fill the engine cooling fan with lubricating grease. After working for a week, the loader accessories should check the oil level of the transmission, hydraulic oil tank, and brake system pump. Check and tighten the bolts of each shaft. Check and tighten the bolts of the wheel rim and brake caliper. Check and tighten the bolts of the bucket teeth. Check and lubricate the door control, parking brake, and speed control system; check the battery after one month of operation. Check whether there are any damage or cracks on the connecting parts of the working equipment and the front and rear frames. Check whether the tire pressure is within the normal range. Open the drain valve of the air compressor tank to add water. After half a year of operation, make sure to clean the speed control box bottom shell to ensure its cleanliness. Replace the front and rear axle oil. We also replace the brake oil. Check the normal operation of the hydraulic system, and consider replacing the gear oil or cleaning the hydraulic oil tank.

Buy a small excavator, buy a second-hand small excavator, buy excavator parts, sell excavator parts, buy a small excavator

Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com