The operation process of small excavator
Posted: Oct 27th, '24, 23:29
Small excavator operation is simple, small and flexible, can work in a narrow environment, suitable for all kinds of work environment instead of human labor occasions, mainly used in orchard digging, landscaping, cable pipelines, trees on the mountain, concrete crushing and other small Spaces. Let's take a look at how it works.
When excavating, the excavator first takes the surface layer and then the lower layer. It can not be excavated to the end at one time. If the ditch is larger than the width of the bucket, it should dig both sides first and then dig the middle. When digging a straight trench, the excavator retreat should be kept in line, and the movement of the bucket can be adjusted according to the track marks left by the retreat.
When excavator operate on slopes or high positions, safety protection operations should be done in advance to avoid the occurrence of sliding and tipping incidents of small excavator ; Do not use buckets to break frozen soil or stones directly. When working near the buried underground cable area, water supply pipe and gas pipeline area, it is necessary to first check the obvious mark on the ground and the underground trend, and adhere to an interval of more than 1 meter when excavating.
When walking, the working device should be put away as far as possible and close to the center of the body to maintain stability; Put the final drive at the back to protect the final drive. Avoid driving over obstacles such as stumps and rocks as much as possible to prevent track distortion; If it is necessary to drive over an obstacle, ensure that the center of the track is on the obstacle.
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
When excavating, the excavator first takes the surface layer and then the lower layer. It can not be excavated to the end at one time. If the ditch is larger than the width of the bucket, it should dig both sides first and then dig the middle. When digging a straight trench, the excavator retreat should be kept in line, and the movement of the bucket can be adjusted according to the track marks left by the retreat.
When excavator operate on slopes or high positions, safety protection operations should be done in advance to avoid the occurrence of sliding and tipping incidents of small excavator ; Do not use buckets to break frozen soil or stones directly. When working near the buried underground cable area, water supply pipe and gas pipeline area, it is necessary to first check the obvious mark on the ground and the underground trend, and adhere to an interval of more than 1 meter when excavating.
When walking, the working device should be put away as far as possible and close to the center of the body to maintain stability; Put the final drive at the back to protect the final drive. Avoid driving over obstacles such as stumps and rocks as much as possible to prevent track distortion; If it is necessary to drive over an obstacle, ensure that the center of the track is on the obstacle.
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com