Selection and maintenance of small loaders

[BONOVO]

Small loader is now one of the common construction machinery in production and life, the purchase of small loaderis more important to look at the engine, the single cylinder engine is connected by the belt, in the old car after the start and clutch use of a little inconvenience, In particular, the clutch is easy to cause problems. It is recommended to choose the press disc clutch, so that the engine can only choose two cylinders and above. The gearbox is generally mechanical, with high bottom speed, which basically does not need to consider the rigid frame structure of the vehicle. It is more economical to use like full hydraulic although easy to use but later maintenance costs are high.

Winter vehicle use is relatively difficult, it is recommended that the vehicle should not start for more than 8 seconds each time. The interval between starts should be about one minute. After starting, wait for the engine to idle for about 3 minutes, one is to charge the battery. The second is to make the water temperature reach 55 degrees Celsius and the barometer reach 0.4Mpa. The temperature of the diesel engine should be higher than 55 degrees Celsius, and the oil temperature should be higher than 45 degrees Celsius to allow full load operation.

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com