Machine Equipment Forums

1. The wear speed is faster because of the harm of the new equipment parts processing, assembly and adjustment of small loader, the friction surface is not smooth, the contact range of the matching surface is small, and the pressure resistance of the surface is not uniform. During the operation of the equipment, the convex and concave parts of the surface of the parts rub against each other, and the broken metal materials worn off continue to participate in friction as wear-resistant materials, which accelerates the wear of the surface of the parts. Therefore, it is easy to lead to wear of parts (especially the matching surface) during the running-in time, and the wear speed is faster. At this time, if the full load work, it may cause the destruction of parts, resulting in the initial common failure. 2. Poor wetting because the newly assembled parts have small gaps, and because of assembly and other reasons, it is difficult to ensure the symmetry of the gaps, and the grease (grease) is not easy to produce a symmetrical oil slick on the friction surface to prevent wear. This in turn reduces the smoothing efficiency, resulting in the initial abnormal wear of the parts. When it is more serious, it will lead to high-precision friction surface scratching or tooth occlusion phenomenon, resulting in common failures. 3. The parts assembled by the new production of loose, there are errors in geometric shapes and specifications, in the early application, because of the damage, vibration and other alternating changes of the load, and the harm of heat, deformation and other factors, coupled with rapid wear and other reasons, it is very easy to cause the original fixed parts loose. 4. Water leakage phenomenon because of the loose parts, vibration and heat damage of the equipment, the sudden surface of the equipment and its tee joint will produce water leakage phenomenon, some forging, production and processing problems in the assembly adjustment is difficult to find, but considering the vibration and impact effect of the work process, such problems are leaked out, mainly manifested as leakage (seepage) oil (water), so, The run-in time is very prone to leakage.

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com