Do you know the four major risks of forklift operation?
Posted: Nov 5th, '24, 20:23
During the operation of forklifttruck, overload, unbalanced loading and unloading goods and accidental fall of goods hurt people. Analysis of the possible reasons for the forklift lifting too fast during operation or transfer speed exceeds the regulations, at this time in the case of a sudden brake to avoid causing the goods on board to fall. It may also be that the goods are not tied to the vehicle body as required or the loaded goods do not match the fork arm device of the forklifttruck, causing the goods to fall from the fork frame.
As a non-manual handling tool for warehousing goods, forkliftis widely used in major workshops, transportation hubs, transit centers and so on. Due to the large volume of forklift operation, it is necessary to pay attention to the following operational risk avoidance and grasp the solution.
Operational risk 1
During the operation of forklifttruck, overload, unbalanced loading and unloading goods and accidental fall of goods hurt people. Analysis of the possible reasons for the forklift lifting too fast during operation or transfer speed exceeds the regulations, at this time in the case of a sudden brake to avoid causing the goods on board to fall. It may also be that the goods are not tied to the vehicle body as required or the loaded goods do not match the fork arm device of the forklifttruck, causing the goods to fall from the fork frame.
This risk can be completely resolved or avoided according to the following points: The operation of the forkliftshould be smooth. Place the goods neatly and tie them to the fork before transport. Never turn sharply when driving. For potholes driving road level in time. At the same time, the loading and unloading of goods shall not be overloaded in accordance with the relevant procedures.
Operational risk II
When the load on the fork is too heavy, the rear of the truck will tilt up. At this time, the personnel will stand at one end of the forklifttruck and use the weight as a balance weight. As a result, the rear of the truck will suddenly tilt up when lifting the goods, causing the personnel to fall. The cause of this accident may be overloaded forklift or personnel standing position without protection.
To avoid such accidents, the safety education of forkliftoperators should be strengthened, and no one except the operator is allowed to stand on the forklift. And according to the regulations shall not be carried over the load.
Operational risk III
When the forklift truck is driving, the side of the truck is overturned, causing personnel and equipment damage. The cause may be oblique driving or turning on the slope when the forklift is loaded. Or the forkliftturns too fast.
Therefore, the driver is required to drive at a low speed, avoid forkliftoperation on the soft ground, and avoid turning to the emergency brake when the load is loaded.
Operational risk IV
When the forklift truck is driving in reverse, the driver's sight is blocked or bad habits lead to injury accidents. The possible cause is that the reversing mirror and reversing tone are not installed or repaired in accordance with regulations. It may also be that the driver is reversing without sounding the siren to remind the people around him.
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
As a non-manual handling tool for warehousing goods, forkliftis widely used in major workshops, transportation hubs, transit centers and so on. Due to the large volume of forklift operation, it is necessary to pay attention to the following operational risk avoidance and grasp the solution.
Operational risk 1
During the operation of forklifttruck, overload, unbalanced loading and unloading goods and accidental fall of goods hurt people. Analysis of the possible reasons for the forklift lifting too fast during operation or transfer speed exceeds the regulations, at this time in the case of a sudden brake to avoid causing the goods on board to fall. It may also be that the goods are not tied to the vehicle body as required or the loaded goods do not match the fork arm device of the forklifttruck, causing the goods to fall from the fork frame.
This risk can be completely resolved or avoided according to the following points: The operation of the forkliftshould be smooth. Place the goods neatly and tie them to the fork before transport. Never turn sharply when driving. For potholes driving road level in time. At the same time, the loading and unloading of goods shall not be overloaded in accordance with the relevant procedures.
Operational risk II
When the load on the fork is too heavy, the rear of the truck will tilt up. At this time, the personnel will stand at one end of the forklifttruck and use the weight as a balance weight. As a result, the rear of the truck will suddenly tilt up when lifting the goods, causing the personnel to fall. The cause of this accident may be overloaded forklift or personnel standing position without protection.
To avoid such accidents, the safety education of forkliftoperators should be strengthened, and no one except the operator is allowed to stand on the forklift. And according to the regulations shall not be carried over the load.
Operational risk III
When the forklift truck is driving, the side of the truck is overturned, causing personnel and equipment damage. The cause may be oblique driving or turning on the slope when the forklift is loaded. Or the forkliftturns too fast.
Therefore, the driver is required to drive at a low speed, avoid forkliftoperation on the soft ground, and avoid turning to the emergency brake when the load is loaded.
Operational risk IV
When the forklift truck is driving in reverse, the driver's sight is blocked or bad habits lead to injury accidents. The possible cause is that the reversing mirror and reversing tone are not installed or repaired in accordance with regulations. It may also be that the driver is reversing without sounding the siren to remind the people around him.
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com