You may have used the wrong cutter!
Posted: Nov 7th, '24, 21:04
1. Carefully read the operation manual of the hydraulic crushing pliers to prevent damage to the hydraulic crushing pliers and the excavator, and operate them effectively.
2, before the operation, check whether the bolts and connecting head are loose, and whether the hydraulic pipeline is leaking.
3. The hydraulic crushing pliers shall not be operated under the condition of full extension or full contraction of the piston rod of the hydraulic cylinder.
4, the hydraulic hose is not allowed to bend sharply, do not allow wear, damage immediately replace, so as not to break hurt.
5, hydraulic crushing pliers and hydraulic excavatoror other engineering construction machinery installation connection, the working pressure and flow of the host hydraulic system must meet the technical parameters of the hydraulic crushing pliers, hydraulic crushing pliers "P" port is connected with the host high-pressure oil circuit, "A" port is connected with the host oil circuit.
6, the best hydraulic oil temperature when the hydraulic crushing pliers work is 50-60 degrees, the maximum shall not exceed 80 degrees. Otherwise, the hydraulic load should be reduced.
7. The staff should check the sharpness of the cutting edge of the excavatorcrushing pliers every day. If the cutting edge is found dull, it should be replaced in time.
8, do not extend the hand or any part of the body into the knife edge or other rotating parts to avoid accidents.
The hydraulic grinding pliers of the excavatorhave a large opening, jaw teeth and a rebar cutter. The design of the large opening can bite the beam with a larger diameter, making the work easier and more convenient. A special shape made of jaw teeth is used to firmly hold the concrete block, wedged and crushed to allow for rapid crushing. The jaw teeth are very strong with high wear resistance, equipped with steel bar cutters, hydraulic crushing pliers can perform both operations at the same time, crushing concrete and cutting exposed steel bars, making crushing operations more efficient.
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
2, before the operation, check whether the bolts and connecting head are loose, and whether the hydraulic pipeline is leaking.
3. The hydraulic crushing pliers shall not be operated under the condition of full extension or full contraction of the piston rod of the hydraulic cylinder.
4, the hydraulic hose is not allowed to bend sharply, do not allow wear, damage immediately replace, so as not to break hurt.
5, hydraulic crushing pliers and hydraulic excavatoror other engineering construction machinery installation connection, the working pressure and flow of the host hydraulic system must meet the technical parameters of the hydraulic crushing pliers, hydraulic crushing pliers "P" port is connected with the host high-pressure oil circuit, "A" port is connected with the host oil circuit.
6, the best hydraulic oil temperature when the hydraulic crushing pliers work is 50-60 degrees, the maximum shall not exceed 80 degrees. Otherwise, the hydraulic load should be reduced.
7. The staff should check the sharpness of the cutting edge of the excavatorcrushing pliers every day. If the cutting edge is found dull, it should be replaced in time.
8, do not extend the hand or any part of the body into the knife edge or other rotating parts to avoid accidents.
The hydraulic grinding pliers of the excavatorhave a large opening, jaw teeth and a rebar cutter. The design of the large opening can bite the beam with a larger diameter, making the work easier and more convenient. A special shape made of jaw teeth is used to firmly hold the concrete block, wedged and crushed to allow for rapid crushing. The jaw teeth are very strong with high wear resistance, equipped with steel bar cutters, hydraulic crushing pliers can perform both operations at the same time, crushing concrete and cutting exposed steel bars, making crushing operations more efficient.
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com