Excavator winter the correct way to open!
Posted: Nov 7th, '24, 21:19
For people living in Xinjiang, the winter is cold and long, although it has been nearly March, the low temperature still has no intention, our excavatoroften can not start the situation, to eliminate the cause of machine failure, there are the following common problems:
1. The battery loss of the excavatoris simply understood to be generated by the collision of sulfuric acid ions and water molecules in the battery. The winter temperature is low, the gap between sulfuric acid ions and water molecules is large, and the moving speed is slow, which is shown by the lack of battery power. Then winter for battery maintenance is also very important, sometimes can be found, even if the total power switch is turned off before work, the next day battery power is still insufficient, the most secure way is to remove the battery after work, stored in a cool, dry place.
2. The revolution is not high, the speed is not high, it is mainly not fully preheating, the usual preheating is divided into air preheating and combustion chamber electric plug heating preheating two methods, the ordinary engine is air preheating, we can find that the old excavatorhas no preheating function, often need to spray starting fluid to help preheat, but now many new machines have this function, Usually at the cab start switch. When the excavator starts, it is generally preheated for 5-10 minutes before starting the excavator.
3. When the cooling water is frozen, the cooling water is better solved when it is frozen, and the water can be discharged before it is frozen to avoid this problem. In winter, we are used to adding antifreeze to the excavator, but it should be noted that do not mix with water, otherwise the effect will be big. In some places in the south, the temperature is not low, rain and snow days are only a few days, then before the rain and snow, you only need to discharge the cooling water, but it should be noted that the idling speed before the flame is turned off, the cooling water temperature drops below 60 ° C, the water is not hot, and then the flame is turned off, and the discharged water is put in the cab with a bucket, and the next day can also be added. Of course, in the case of conditions, adding appropriate hot water is also a way, but do not use hot water to pour in other parts.
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
1. The battery loss of the excavatoris simply understood to be generated by the collision of sulfuric acid ions and water molecules in the battery. The winter temperature is low, the gap between sulfuric acid ions and water molecules is large, and the moving speed is slow, which is shown by the lack of battery power. Then winter for battery maintenance is also very important, sometimes can be found, even if the total power switch is turned off before work, the next day battery power is still insufficient, the most secure way is to remove the battery after work, stored in a cool, dry place.
2. The revolution is not high, the speed is not high, it is mainly not fully preheating, the usual preheating is divided into air preheating and combustion chamber electric plug heating preheating two methods, the ordinary engine is air preheating, we can find that the old excavatorhas no preheating function, often need to spray starting fluid to help preheat, but now many new machines have this function, Usually at the cab start switch. When the excavator starts, it is generally preheated for 5-10 minutes before starting the excavator.
3. When the cooling water is frozen, the cooling water is better solved when it is frozen, and the water can be discharged before it is frozen to avoid this problem. In winter, we are used to adding antifreeze to the excavator, but it should be noted that do not mix with water, otherwise the effect will be big. In some places in the south, the temperature is not low, rain and snow days are only a few days, then before the rain and snow, you only need to discharge the cooling water, but it should be noted that the idling speed before the flame is turned off, the cooling water temperature drops below 60 ° C, the water is not hot, and then the flame is turned off, and the discharged water is put in the cab with a bucket, and the next day can also be added. Of course, in the case of conditions, adding appropriate hot water is also a way, but do not use hot water to pour in other parts.
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com