Use of loader oil

[DIG-DOG]

The lack of oil in the loader may lead to poor lubrication effect, the mechanical damage rate may even cause accidents, but too much oil will not only reduce the friction of the machinery in the transmission process, and even make the rotation resistance of the crankshaft larger, making the power consumption greater, and bubbles are prone to appear in the rotation process, making the lubrication effect poor.

When choosing lubricants, the loader should choose lubricants with smaller viscosity, because the viscosity of the lubricant is too high, it will make the oil pump loose performance becomes worse, the flow becomes smaller, making the lubricity and heat dissipation become worse, and some unnecessary failures occur.

Nowadays, lubricating oil is added with different degrees of additives according to different situations, sometimes the oil begins to turn black shortly after the use of time, but do not think that this is the oil deterioration needs to be replaced, due to different conditions, the addition of different additives, so that it can not be judged from a single point of view whether the oil deterioration, need to be analyzed in a variety of scenarios, Making a decision on whether to replace it.

Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at https://www.dig-dog.com/

contact # : +86 158 6218 2088

email : sales@bonovogroup.com