Excavator lifting, these three points should be kept in mind!
Posted: Nov 12th, '24, 01:17
In addition to digging, the magic excavator is used to install a car, dig a ditch or level the ground, which are daily work, such as crushing, demolition, lifting, etc., these are not matters ~ today we will take a look at the excavatorlifting needs attention.
1, safe lifting to prevent slipping
There is a hook behind the general bucket, and it is the most secure to lift here, especially when the object needs to be lifted to a certain height, if the rope is hung on the bucket teeth, it is easy to slip in the process of lifting. The use of hooks can ensure that the rope will not slip, is the most recommended safe hoisting method.
When the object to be lifted is very close to the excavator, it is very suitable for directly hooking the object with the bucket teeth. In addition, if the lifting distance is not very high, the bucket tooth hook is also very convenient and efficient.
2, the bottom plate stability to prevent rollover
Steady body is the precursor of efficient and safe operation! When hoisting, the excavatormust stand on a horizontal stop surface; If the object must be lifted on an inclined plane, a horizontal stop surface can be dug out first. The direction of the excavator chassis is also very important, the smaller the Angle between the lifting direction and the direction of the chassis track, the safer the excavator, and the larger the Angle, the easier it is to cause the excavatorto overturn.
When the excavatoris lifting, it is actually a lever state, and it is necessary to always pay attention to the distance between the center of gravity of the lifting object and the center of gravity of the excavator.
The closer the lifting object is to the center of gravity of the excavator, the safer the excavator is, and the lifting capacity can be maximized. The farther the lifting object is from the center of gravity of the excavator, the greater the danger of the excavator overturning, and the more limited the lifting capacity of the excavator.
3, reasonable operation safety first
It is necessary to pay attention to lifting objects, do not lift too high when it is not necessary to lift too high, once the excavatoris in danger of overturning, it is necessary to lower the big arm at the first time, and quickly put the lifted object on the ground.
Excavator accessories
Finally, it is necessary to ensure that there are no people nearby when lifting, and ensure that the rope is vertical before lifting to prevent collision casualties.
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
1, safe lifting to prevent slipping
There is a hook behind the general bucket, and it is the most secure to lift here, especially when the object needs to be lifted to a certain height, if the rope is hung on the bucket teeth, it is easy to slip in the process of lifting. The use of hooks can ensure that the rope will not slip, is the most recommended safe hoisting method.
When the object to be lifted is very close to the excavator, it is very suitable for directly hooking the object with the bucket teeth. In addition, if the lifting distance is not very high, the bucket tooth hook is also very convenient and efficient.
2, the bottom plate stability to prevent rollover
Steady body is the precursor of efficient and safe operation! When hoisting, the excavatormust stand on a horizontal stop surface; If the object must be lifted on an inclined plane, a horizontal stop surface can be dug out first. The direction of the excavator chassis is also very important, the smaller the Angle between the lifting direction and the direction of the chassis track, the safer the excavator, and the larger the Angle, the easier it is to cause the excavatorto overturn.
When the excavatoris lifting, it is actually a lever state, and it is necessary to always pay attention to the distance between the center of gravity of the lifting object and the center of gravity of the excavator.
The closer the lifting object is to the center of gravity of the excavator, the safer the excavator is, and the lifting capacity can be maximized. The farther the lifting object is from the center of gravity of the excavator, the greater the danger of the excavator overturning, and the more limited the lifting capacity of the excavator.
3, reasonable operation safety first
It is necessary to pay attention to lifting objects, do not lift too high when it is not necessary to lift too high, once the excavatoris in danger of overturning, it is necessary to lower the big arm at the first time, and quickly put the lifted object on the ground.
Excavator accessories
Finally, it is necessary to ensure that there are no people nearby when lifting, and ensure that the rope is vertical before lifting to prevent collision casualties.
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com