How should the loader operate in different situations

[BONOVO]

Channel loading: the two loaders are alternately loaded, and the dump truck moves to the front of each loaderonce, and each loads a bucket. The two loadermust be timed to each other.

When it is necessary to shorten the transport cycle of the dump truck on a large site, or when several loaderand dump trucks on the site work on the same route, or when the work road is wide, this method can improve the work efficiency.

Approach the rock face at a vertical Angle: If the rock face is always straight, all three types of excavation work, cross-loading, V-loading and channel loading can be carried out well. If the stone face is not smooth, it will reduce the efficiency of the work.

If the stone face is uneven: the loaderwill touch the protruding part of the stone face, and the loaderwill be further away from the stone face and increase the travel distance. When the protrusion is excavated, the loader will gradually move away from the stone face. Because the dump truck is not easy to bend, it has to walk close to the prominent part. Therefore, the loader must excavate the protrusion. However, the loaderhad to clear the stones scattered in the recesses, which would have made digging quite difficult.

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com