Wheeled excavator vehicles need to pay attention to what problems when going up and down the slope
Posted: Nov 22nd, '24, 02:03
1. Before going up and down the slope, we must pay attention to observe the surrounding situation, judge whether there are any dangerous problems around and the size of the slope. Our wheeled excavatormanufacturer reminds you not to climb blindly, you need to check in advance, first of all, we must have a preliminary judgment on the actual Angle of the ramp, whether it is within the controllable scope of the excavatoroperation, and also look at whether it has just rained on the slope, if it is very slippery, it is recommended that you do not climb.
2. Never forget to fasten your seat belt. Many drivers do not have the consciousness to fasten their seat belts when going up and down hills, but in the process of downhill, if there is no restraint of the seat belt, the driver will lean forward, so remind everyone not to forget to fasten their seat belts when climbing hills.
3. Clean all obstacles on the ramp before going up and down the slope. There will be some obstacles near many uphill and downhill slopes, which may be stones or fallen trees, which will hinder the safe driving of the excavator, so the obstacles need to be clean before going uphill, especially to remove relatively large stones. When climbing, not very large stones will make the excavatortrack slip, and it will be too late for an accident.
4. Do not forget to lower the bucket when going up and down the slope, between 20cm and 30cm from the ground. This is very important to ensure the safety of driving, so that it remains about 20 to 30cm from the ground, when there is a dangerous situation, you can immediately put down the working device to keep the excavatorstable, so that it stops sliding downward.
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
2. Never forget to fasten your seat belt. Many drivers do not have the consciousness to fasten their seat belts when going up and down hills, but in the process of downhill, if there is no restraint of the seat belt, the driver will lean forward, so remind everyone not to forget to fasten their seat belts when climbing hills.
3. Clean all obstacles on the ramp before going up and down the slope. There will be some obstacles near many uphill and downhill slopes, which may be stones or fallen trees, which will hinder the safe driving of the excavator, so the obstacles need to be clean before going uphill, especially to remove relatively large stones. When climbing, not very large stones will make the excavatortrack slip, and it will be too late for an accident.
4. Do not forget to lower the bucket when going up and down the slope, between 20cm and 30cm from the ground. This is very important to ensure the safety of driving, so that it remains about 20 to 30cm from the ground, when there is a dangerous situation, you can immediately put down the working device to keep the excavatorstable, so that it stops sliding downward.
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com