Loader shovel digging operation environment use skills
Posted: Nov 22nd, '24, 02:08
1) Keep the working area flat and remove falling rocks.
2) When loading loose materials, work in 1 or 2 gears; When loading heavy materials, work in 1 gear.
3) Drive and lower the bucket, stop the bucket 30cm above the ground, and then slowly fall; If the bucket hits the ground, the front wheel will lift off the ground, causing the tire to slide, resulting in reduced tire life.
4) Shift gears before approaching the material, press the accelerator pedal after shifting, and insert the bucket into the material.
5) If the shovel is loose material, put the bucket flat; If the material is gravel, the pin is slightly turned down the bucket; Do not have gravel under the bucket, so as not to cause wheelie, skid; Try to keep the load in the center of the bucket. If the load is on one side of the bucket, it will be out of balance.
6) While inserting the bucket into the material, lift the boom to prevent the bucket from being inserted too deeply; When lifting the boom, the front wheels will generate sufficient traction.
7) Check whether enough material has been shoveled, manipulate the control lever, and collect the bucket in order to fill the bucket.
8) If too much material is loaded, quickly collect the bucket and flip the bucket to shake off the excess load, so as to avoid falling when transporting the material.
9) When shoveling and loading on flat ground, make the bucket blade slightly downward and drive the loader; Pay attention to avoid the load inclined to the side of the bucket, causing imbalance, the operation should be carried out in first gear.
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
2) When loading loose materials, work in 1 or 2 gears; When loading heavy materials, work in 1 gear.
3) Drive and lower the bucket, stop the bucket 30cm above the ground, and then slowly fall; If the bucket hits the ground, the front wheel will lift off the ground, causing the tire to slide, resulting in reduced tire life.
4) Shift gears before approaching the material, press the accelerator pedal after shifting, and insert the bucket into the material.
5) If the shovel is loose material, put the bucket flat; If the material is gravel, the pin is slightly turned down the bucket; Do not have gravel under the bucket, so as not to cause wheelie, skid; Try to keep the load in the center of the bucket. If the load is on one side of the bucket, it will be out of balance.
6) While inserting the bucket into the material, lift the boom to prevent the bucket from being inserted too deeply; When lifting the boom, the front wheels will generate sufficient traction.
7) Check whether enough material has been shoveled, manipulate the control lever, and collect the bucket in order to fill the bucket.
8) If too much material is loaded, quickly collect the bucket and flip the bucket to shake off the excess load, so as to avoid falling when transporting the material.
9) When shoveling and loading on flat ground, make the bucket blade slightly downward and drive the loader; Pay attention to avoid the load inclined to the side of the bucket, causing imbalance, the operation should be carried out in first gear.
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com