Loader level operation precautions

[BONOVO]

When working on the ground, the loaderruns in reverse gear. If it is necessary to work before the gear level, the bucket take-up Angle should be greater than 20°.

1) Shovel the soil into the bucket, and reverse the loader, so that the soil is evenly scattered from the bucket.

2) Stick the bucket teeth to the ground, and spread the soil evenly using the trailing traction force.

3) Shovel the soil again with the bucket, float the boom, place the bucket on the ground, and move the loaderback to level the ground.

Loading and carrying operations

1) When carrying, drop the bucket to lower the center of gravity.

2) The loading and carrying methods of wheel loaderinclude the following cycle: shovel loading - transport - loading (pouring into the dump truck, furnace, etc.).

4) Good maintenance of transport routes.

5) The efficiency of transferring materials within 100m is higher, and its speed should be determined according to the road condition; During transportation, it is forbidden to carry the lifting boom, especially in the case of uneven site.

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com