What are the factors of high temperature in small excavators
Posted: Oct 21st, '24, 23:20
The phenomenon of high temperature in the excavator is a headache for the operator. Of course, the condition of high temperature in the equipment is not caused by a fault. In many cases, the fault is caused by multiple reasons. So the overall temperature of the excavation will rise. We need to observe the water temperature in time when construction.
In addition, when the tank of a small excavator has a problem, it sometimes causes a high temperature situation of the excavator, for example, when there is some intake air in the water channel during the water circulation, the overall temperature of the equipment will appear in a high temperature state. When the water tank of the small excavator bubbles, it will also cause the high temperature state of the equipment. This is mainly because the engine cylinder pad has a punching machine problem, so it will cause the high temperature state of the equipment.
The two conditions we mentioned above are also closely related to the water temperature of the excavator and the situation of the water tank. In addition, the general working environment of the small excavator is relatively harsh, so the machine will be covered with dust and dirt during the construction process, and so on. If the long-term repair and maintenance is not carried out, the heat dissipation efficiency will still be relatively low, resulting in a high temperature state of the entire machine.
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
In addition, when the tank of a small excavator has a problem, it sometimes causes a high temperature situation of the excavator, for example, when there is some intake air in the water channel during the water circulation, the overall temperature of the equipment will appear in a high temperature state. When the water tank of the small excavator bubbles, it will also cause the high temperature state of the equipment. This is mainly because the engine cylinder pad has a punching machine problem, so it will cause the high temperature state of the equipment.
The two conditions we mentioned above are also closely related to the water temperature of the excavator and the situation of the water tank. In addition, the general working environment of the small excavator is relatively harsh, so the machine will be covered with dust and dirt during the construction process, and so on. If the long-term repair and maintenance is not carried out, the heat dissipation efficiency will still be relatively low, resulting in a high temperature state of the entire machine.
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com