How should the pump truck be maintained daily

[DIG-DOG]

1. Basic maintenance every day:

1. After pumping for about 5 minutes before starting every day, it is necessary to check the lubrication of the four lubrication points in the hopper and the washing room to see whether the lubrication is normal.

2. The water in the washing room should be discharged after completion every day. Clean the washing chamber and exit the piston to check the piston, then tighten the drain rubber plug and add new water.

3. After the completion of the day, it is necessary to clean the cement left in the hopper and the car in time (no cement can be left in the dead corner of the hopper). Avoid unnecessary trouble for future cleaning work.

2. Basic monthly maintenance:

1. The vehicle needs to be buttered once a month, and the amount of butter must be stopped until the clean oil is squeezed out of the dirty oil.

2. Check the condition of the boom, leg limit pin and other structural parts such as the boom, leg, turret and girder every month. See if there's any cracking or anything.

3. Check whether the cutting ring and glasses plate are worn or the gap is too large every month. If there is wear, turn the cutting ring 90&deg in time; In this way, the service life of the cutting ring will be doubled. It is also necessary to check the observation hole of the stirring motor seat every month to check whether the slurry is leaking.

Three, the annual basic maintenance:

1. Need to replace hydraulic oil, transfer box, reducer oil every year.

2. The performance of the vehicle needs to be checked and tested once a year.

In addition, the maintenance of the chassis is also very important, please also timely maintenance of the chassis.

Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com