Single beam crane safety management system guide
Posted: Dec 10th, '24, 01:13
one Safety management rules and regulations
Safety management rules and regulations include:
(1) Guidelines for drivers of lifting machinery and safe operating procedures;
(2) lifting machinery maintenance, maintenance, inspection and inspection system;
(3) lifting machinery safety information technology file management accounting system;
(4) Crane operation and maintenance personnel safety training and assessment system;
(5) The unit that uses lifting machinery shall apply to the local competent department for the safety technical inspection of lifting machinery in use, and replace the management of the license for the use of lifting machinery.
2. Establish lifting machinery safety technical files
The items of safety management technical files of single beam lifting machinery mainly include:
(1) Equipment factory technical documents;
(2) Installation, maintenance records and acceptance data;
(3) Use, maintenance, maintenance, inspection and test records;
(4) Supervision and inspection report of safety management technology;
(5) Equipment and personal accident records;
(6) Equipment failure analysis and evaluation records.
3. lifting machinery inspection system
The use of self-management inspection of the crane by the more individual units, in addition to the routine inspection of the operation designer per shift, but also according to the workload of the crane and the severity of the environmental impact of the monthly inspection and annual inspection.
(1) Annual audit. A full inspection of all lifting equipment in use is less than four times a year. If the crane is not used for more than a year, more than 4 earthquakes or major equipment accidents occur, and the open-air crane is subject to more than 9 winds, a comprehensive inspection should be carried out before it can be used. Load tests can be carried out by lifting a weight equivalent to the rated lifting weight, and lifting, running, rotating and amplitude varying operations can be performed at rated speeds. Check the safety technical performance of the normal working mechanism of the crane, the deformation, cracks, corrosion, welding seams, rivets, bolts and so on.
(2) Monthly inspection, including:
a, safety device, brake, clutch, etc. The presence of anomalies, reliability and accuracy;
b, the status of important basic parts (such as spillage, wire rope through pulley block, brake, sling and auxiliary equipment, etc.), whether there is damage, whether it should be scrapped, etc.;
C. Leakage and performance of electrical and hydraulic systems and their components;
Power systems and controllers, etc. If the crane has been out of service for more than a month, the above inspection should be carried out before use.
(3) Daily inspection. Before daily operation, check all kinds of safety protection devices, brakes, operation control devices and emergency alarm devices; The safety status of the track; Safety condition of wire rope. If any abnormal situation is found during the inspection, it can be handled in time, and it is strictly prohibited to run with illness.
4. Training and education of operation management personnel of single beam lifting machinery
Lifting operation is a collective operation coordinated by command, crane driver and crane driver, and the safety quality of personnel is the key to safe operation.
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
Safety management rules and regulations include:
(1) Guidelines for drivers of lifting machinery and safe operating procedures;
(2) lifting machinery maintenance, maintenance, inspection and inspection system;
(3) lifting machinery safety information technology file management accounting system;
(4) Crane operation and maintenance personnel safety training and assessment system;
(5) The unit that uses lifting machinery shall apply to the local competent department for the safety technical inspection of lifting machinery in use, and replace the management of the license for the use of lifting machinery.
2. Establish lifting machinery safety technical files
The items of safety management technical files of single beam lifting machinery mainly include:
(1) Equipment factory technical documents;
(2) Installation, maintenance records and acceptance data;
(3) Use, maintenance, maintenance, inspection and test records;
(4) Supervision and inspection report of safety management technology;
(5) Equipment and personal accident records;
(6) Equipment failure analysis and evaluation records.
3. lifting machinery inspection system
The use of self-management inspection of the crane by the more individual units, in addition to the routine inspection of the operation designer per shift, but also according to the workload of the crane and the severity of the environmental impact of the monthly inspection and annual inspection.
(1) Annual audit. A full inspection of all lifting equipment in use is less than four times a year. If the crane is not used for more than a year, more than 4 earthquakes or major equipment accidents occur, and the open-air crane is subject to more than 9 winds, a comprehensive inspection should be carried out before it can be used. Load tests can be carried out by lifting a weight equivalent to the rated lifting weight, and lifting, running, rotating and amplitude varying operations can be performed at rated speeds. Check the safety technical performance of the normal working mechanism of the crane, the deformation, cracks, corrosion, welding seams, rivets, bolts and so on.
(2) Monthly inspection, including:
a, safety device, brake, clutch, etc. The presence of anomalies, reliability and accuracy;
b, the status of important basic parts (such as spillage, wire rope through pulley block, brake, sling and auxiliary equipment, etc.), whether there is damage, whether it should be scrapped, etc.;
C. Leakage and performance of electrical and hydraulic systems and their components;
Power systems and controllers, etc. If the crane has been out of service for more than a month, the above inspection should be carried out before use.
(3) Daily inspection. Before daily operation, check all kinds of safety protection devices, brakes, operation control devices and emergency alarm devices; The safety status of the track; Safety condition of wire rope. If any abnormal situation is found during the inspection, it can be handled in time, and it is strictly prohibited to run with illness.
4. Training and education of operation management personnel of single beam lifting machinery
Lifting operation is a collective operation coordinated by command, crane driver and crane driver, and the safety quality of personnel is the key to safe operation.
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com