Hammer hose repair

[BONOVO]

① Storage should be parked in a dry indoor, forced to stop in the outdoor, 25 crushing hammer hose, should choose a flat ground and covered with wood. Cover with a cloth after parking.
The arrangement and arrangement at the parking airport during storage should ensure that the entry and exit of any machine is not affected by other machines.
③ When storing, the fuel control lever of the machine should be placed in the idle position, and each joystick should be placed in the neutral position.
(4) Before long-term storage, it is necessary to maintain the machinery, repair the damaged parts, and thoroughly clean it, and maintain the technical condition is good.
⑤ Before storage, remove the battery, place the battery in a dry and antifreeze place, keep its surface clean and dry, and do not place conductive objects on the battery.
Before storage, the cooling water in the engine should be discharged, the engine oil should be replaced, and the engine should be started once a month during the shutdown period, so that the machinery can travel a short distance, so that a new oil film can be established at the lubrication of each part to prevent rust. Note: The cooling water should be filled before starting, and the cooling water should be drained at the end.
In addition, when the crusher is stored, if it is in a low temperature environment, it must be stored after lubrication with low viscosity grease, so that the internal parts of the crusher are well lubricated to prevent serious friction between the parts and cause damage to the parts.

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com