How to maintain the loader water tank in high temperature in summer
Posted: Dec 19th, '24, 21:31
Summer is the peak season for loader use and the high incidence of water tank failure. The water tank is an important part of the loader cooling system. Its function is to dissipate the heat generated by the engine through circulating water and maintain the normal operating temperature of the engine. If there is a problem with the water tank, it will cause the engine to overheat or even damage. Therefore, it is very necessary to maintain the loader water tank in summer. The following are some common maintenance methods
1. Check whether there is dirt, rust or blockage inside and outside the water tank. If so, it should be cleaned or replaced in time. When cleaning, you can use a soft brush or compressed air to blow away the dust on the surface, and then rinse with clean water. If there is rust or blockage, you can soak it with a special cleaning agent or acid solution, and then rinse it with clean water.
2. Check whether the coolant in the water tank is sufficient, clean and qualified. If it is insufficient, it should be replenished in time. If it is not clean or unqualified, it should be replaced in time. When replacing, the old coolant should be drained first, then the inside of the water tank should be rinsed with clean water, and then new coolant should be added. The type and proportion of coolant should be selected according to the instruction manual of the loader or the requirements of the manufacturer.
3. Check whether the water tank cap is well sealed and whether there are cracks or deformations. If so, it should be replaced in time. The water tank cap is an important component to maintain the pressure in the water tank. If it is not well sealed, the coolant will evaporate too quickly and reduce the cooling effect.
4. Check whether there is leakage or looseness in the connection between the water tank and the engine, radiator, etc. If so, tighten or replace the gasket, hose and other parts in time. Leakage or looseness will cause coolant loss and affect the normal operation of the cooling system.
5. Check, clean and replace the coolant in the water tank regularly. It is generally recommended to do so once a year or every 10,000 kilometers. This can extend the service life of the water tank and improve the working efficiency and safety of the loader.
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
1. Check whether there is dirt, rust or blockage inside and outside the water tank. If so, it should be cleaned or replaced in time. When cleaning, you can use a soft brush or compressed air to blow away the dust on the surface, and then rinse with clean water. If there is rust or blockage, you can soak it with a special cleaning agent or acid solution, and then rinse it with clean water.
2. Check whether the coolant in the water tank is sufficient, clean and qualified. If it is insufficient, it should be replenished in time. If it is not clean or unqualified, it should be replaced in time. When replacing, the old coolant should be drained first, then the inside of the water tank should be rinsed with clean water, and then new coolant should be added. The type and proportion of coolant should be selected according to the instruction manual of the loader or the requirements of the manufacturer.
3. Check whether the water tank cap is well sealed and whether there are cracks or deformations. If so, it should be replaced in time. The water tank cap is an important component to maintain the pressure in the water tank. If it is not well sealed, the coolant will evaporate too quickly and reduce the cooling effect.
4. Check whether there is leakage or looseness in the connection between the water tank and the engine, radiator, etc. If so, tighten or replace the gasket, hose and other parts in time. Leakage or looseness will cause coolant loss and affect the normal operation of the cooling system.
5. Check, clean and replace the coolant in the water tank regularly. It is generally recommended to do so once a year or every 10,000 kilometers. This can extend the service life of the water tank and improve the working efficiency and safety of the loader.
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com