Lubrication management of single beam crane reducer
Posted: Dec 23rd, '24, 01:11
For the reducers of the operating mechanisms and lifting mechanisms of large and small cars on single beams, oil bath lubrication is usually used. Double-beam cranes mainly include lifting mechanisms, operating mechanisms, luffing mechanisms, slewing mechanisms and metal structures. The lifting mechanism is the basic working mechanism of the crane, which is mostly composed of a suspension system and a winch, and there are also hydraulic systems that lift heavy objects. The crane is composed of a drive device and a slewing bearing device to rotate the boom. The metal structure is the skeleton of the crane. The main load-bearing parts such as the bridge, boom and gantry can be box-shaped structures or truss structures, or web structures. Some can use steel as supporting beams. Intelligent cranes are multi-action lifting machinery that vertically lifts and horizontally transports heavy objects within a certain range. [1] The working characteristic is intermittent movement, that is, the corresponding mechanisms of the actions of picking up materials, moving, unloading, etc. work alternately in a relatively large working cycle. The development and use of cranes in the market are becoming more and more extensive. Since the gears of the reducer of the crane often work under heavy load impact and timely shutdown, it is necessary to use a lubricant with higher viscosity and better than general reducer oil.
The cleaning oil of the gear reducer should be replaced every six months, and it should be carried out at the same time as maintenance. The oil level of the single-beam crane reducer should be filled below the lower graduation line of the cursor. When there is a lack of oil, the oil should not exceed the oil mark on the scale line, so that the gear is lower and the gear is filled with oil, which is enough to ensure sufficient lubrication.
The lubricating bearings in the single-beam crane reducer use nut-type oil cups. At room temperature, 1# cap-based grease can be used, and it should be filled 12 times per shift, and the cap should be tightened 1-2 times each time. Under high temperature conditions, calcium-sodium-based grease with a higher viscosity should be used, and it should be filled 2-3 times per shift, and the cap should be tightened 1-2 times each time.
The rolling bearings in the single-beam crane reducer should use calcium-based grease at normal operating temperature, and the grease should be changed every six months. In the design reducer of large truck cranes, the bearing system is generally supplied with oil by an oil pump. It is only necessary to check the oil level and the actual working conditions of the oil pump to ensure normal lubrication of the enterprise.
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
The cleaning oil of the gear reducer should be replaced every six months, and it should be carried out at the same time as maintenance. The oil level of the single-beam crane reducer should be filled below the lower graduation line of the cursor. When there is a lack of oil, the oil should not exceed the oil mark on the scale line, so that the gear is lower and the gear is filled with oil, which is enough to ensure sufficient lubrication.
The lubricating bearings in the single-beam crane reducer use nut-type oil cups. At room temperature, 1# cap-based grease can be used, and it should be filled 12 times per shift, and the cap should be tightened 1-2 times each time. Under high temperature conditions, calcium-sodium-based grease with a higher viscosity should be used, and it should be filled 2-3 times per shift, and the cap should be tightened 1-2 times each time.
The rolling bearings in the single-beam crane reducer should use calcium-based grease at normal operating temperature, and the grease should be changed every six months. In the design reducer of large truck cranes, the bearing system is generally supplied with oil by an oil pump. It is only necessary to check the oil level and the actual working conditions of the oil pump to ensure normal lubrication of the enterprise.
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com