Pay attention to four points to help you reduce parts wear
Posted: Dec 24th, '24, 02:31
Keep working at rated load
The nature and size of the working load of construction machinery have an important impact on the wear of mechanical parts. Generally speaking, the wear of parts will increase with the increase of load. When the load borne by the parts is higher than the designed working load, the wear will be aggravated. Under the same conditions, stable loads cause less wear on parts than high-frequency dynamic loads, with fewer failures and longer life.
Preventing corrosion of parts
Corrosion acts on parts, which is sometimes difficult to detect and easily overlooked, and is more harmful.
Rainwater, chemicals in the air, etc. penetrate into the machinery through the pipes and gaps of mechanical parts, corroding parts. The continued work of corroded parts will also accelerate the wear of the machinery and increase mechanical failures. This requires managers and operators to take reasonable construction arrangements according to the local weather conditions and the site conditions at the time, so as to minimize the harm of chemical corrosion to mechanical parts.
Cleaning in time to reduce the impact of mechanical impurities
Mechanical impurities generally refer to substances such as dust and soil, and some metal chips and oil stains generated by construction machinery itself during use. Once these impurities reach the working surface of the machine, the harm is great: not only will the friction increase and the oil consumption increase, but also the lubricating oil film will be destroyed and the mating surface will be scratched.
Keep the parts at a reasonable temperature
During work, the temperature of each component has its own normal range. Too high or too low temperature will affect the strength of the parts, so it is necessary to use coolant and lubricating oil to control the temperature of some parts so that they work within a reasonable temperature range.
Less wear on parts means less replacement or even no replacement. Saving money is making money!
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
The nature and size of the working load of construction machinery have an important impact on the wear of mechanical parts. Generally speaking, the wear of parts will increase with the increase of load. When the load borne by the parts is higher than the designed working load, the wear will be aggravated. Under the same conditions, stable loads cause less wear on parts than high-frequency dynamic loads, with fewer failures and longer life.
Preventing corrosion of parts
Corrosion acts on parts, which is sometimes difficult to detect and easily overlooked, and is more harmful.
Rainwater, chemicals in the air, etc. penetrate into the machinery through the pipes and gaps of mechanical parts, corroding parts. The continued work of corroded parts will also accelerate the wear of the machinery and increase mechanical failures. This requires managers and operators to take reasonable construction arrangements according to the local weather conditions and the site conditions at the time, so as to minimize the harm of chemical corrosion to mechanical parts.
Cleaning in time to reduce the impact of mechanical impurities
Mechanical impurities generally refer to substances such as dust and soil, and some metal chips and oil stains generated by construction machinery itself during use. Once these impurities reach the working surface of the machine, the harm is great: not only will the friction increase and the oil consumption increase, but also the lubricating oil film will be destroyed and the mating surface will be scratched.
Keep the parts at a reasonable temperature
During work, the temperature of each component has its own normal range. Too high or too low temperature will affect the strength of the parts, so it is necessary to use coolant and lubricating oil to control the temperature of some parts so that they work within a reasonable temperature range.
Less wear on parts means less replacement or even no replacement. Saving money is making money!
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com