Construction efficiency is determined by five aspects
Posted: Dec 24th, '24, 02:33
Tool matching
When the excavator is working, the tool specifications and models will affect the excavation performance, stability, working cycle time and fuel consumption, so the "optimal matching" of the tool is very important;
Over-large tool configuration will lead to excessive engine speed, increased hydraulic power output, longer excavation time and excessive excavation force;
Too small tool configuration will lead to reduced production and additional working cycles;
All these situations will increase fuel consumption. You need to communicate with the agent according to the specific working conditions and choose the most matching bucket to achieve the best operating benefits.
Equipment matching
Each equipment is designed for working conditions. Under complex working conditions, it is recommended to scientifically match equipment for various construction needs to maximize fuel efficiency.
Usually, the construction performance of equipment of the same level is not much different, but different equipment still has its own strengths. For example, some equipment has a more obvious cumulative fuel saving effect in high-intensity and long-term operations (such as 336D2 XE), and some equipment can minimize the unit time operation cost (such as 336D2 GC). How to use the equipment correctly in the working conditions it is best at is the key and necessary condition to maximize fuel efficiency.
Tire selection
Research by construction machinery tire manufacturers shows that the correct use of radial tires can save up to 10% of fuel consumption. Among them, tire pressure has the most significant impact on fuel efficiency: if the tire pressure is insufficient, the resistance of the wheeled equipment will be greater, which will increase fuel consumption and cause a decrease in production due to unstable equipment movement; while excessive tire pressure will change the smoothness of the wheeled equipment and increase material loss caused by bumps, thereby affecting production.
Featured configuration
The equipment is designed with a variety of fuel-saving and production-increasing configurations, such as multi-condition mode, fuel management system, anti-skid traction device and load-sensing hydraulic system. These configurations can be targeted according to construction needs under different working conditions, while increasing production and reducing users' operating costs.
Matching loading and transportation equipment
The correct configuration of excavators, loaders and transportation vehicles will also affect fuel efficiency. Ideally, 4-6 loading cycles to fill a truck is the best match. Usually, agents will provide the best equipment matching suggestions based on the customer's working conditions, so when you buy an excavator or loader, you can also provide the truck information to the agent so that they can give reasonable matching suggestions.
Choosing the right equipment can improve the equipment utilization rate on the construction site, make the construction production efficiency higher, save equipment fuel consumption costs; the equipment functions are fully utilized, the machine life is longer, and the reliability is higher.
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
When the excavator is working, the tool specifications and models will affect the excavation performance, stability, working cycle time and fuel consumption, so the "optimal matching" of the tool is very important;
Over-large tool configuration will lead to excessive engine speed, increased hydraulic power output, longer excavation time and excessive excavation force;
Too small tool configuration will lead to reduced production and additional working cycles;
All these situations will increase fuel consumption. You need to communicate with the agent according to the specific working conditions and choose the most matching bucket to achieve the best operating benefits.
Equipment matching
Each equipment is designed for working conditions. Under complex working conditions, it is recommended to scientifically match equipment for various construction needs to maximize fuel efficiency.
Usually, the construction performance of equipment of the same level is not much different, but different equipment still has its own strengths. For example, some equipment has a more obvious cumulative fuel saving effect in high-intensity and long-term operations (such as 336D2 XE), and some equipment can minimize the unit time operation cost (such as 336D2 GC). How to use the equipment correctly in the working conditions it is best at is the key and necessary condition to maximize fuel efficiency.
Tire selection
Research by construction machinery tire manufacturers shows that the correct use of radial tires can save up to 10% of fuel consumption. Among them, tire pressure has the most significant impact on fuel efficiency: if the tire pressure is insufficient, the resistance of the wheeled equipment will be greater, which will increase fuel consumption and cause a decrease in production due to unstable equipment movement; while excessive tire pressure will change the smoothness of the wheeled equipment and increase material loss caused by bumps, thereby affecting production.
Featured configuration
The equipment is designed with a variety of fuel-saving and production-increasing configurations, such as multi-condition mode, fuel management system, anti-skid traction device and load-sensing hydraulic system. These configurations can be targeted according to construction needs under different working conditions, while increasing production and reducing users' operating costs.
Matching loading and transportation equipment
The correct configuration of excavators, loaders and transportation vehicles will also affect fuel efficiency. Ideally, 4-6 loading cycles to fill a truck is the best match. Usually, agents will provide the best equipment matching suggestions based on the customer's working conditions, so when you buy an excavator or loader, you can also provide the truck information to the agent so that they can give reasonable matching suggestions.
Choosing the right equipment can improve the equipment utilization rate on the construction site, make the construction production efficiency higher, save equipment fuel consumption costs; the equipment functions are fully utilized, the machine life is longer, and the reliability is higher.
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com