The main features of snow sweepers

[DIG-DOG]

Do you know the main features of snow sweepers? Snow sweepers are about 30cm in diameter and can be installed on excavators, loaders, tractors and other vehicles. Snow sweepers can be used in conjunction with independent hydraulic stations or get power from the chassis of the car. Snow sweepers are easy to install and disassemble, and reliable to operate.

Snow sweepers are mainly used to dig trenches and sweep snow to both ends of the road. They are only suitable for sweeping loose snow below 5 cm, that is, snow that has just fallen and has not been crushed by people and vehicles. The texture is loose, the volume is large, and the fluidity is good; the advantage of snow sweepers is that they are not affected by the flatness of the road surface. Even if the road surface is uneven, it can be cleaned cleanly. This is where it is better than snow sweepers.

The main features of snow sweepers are as follows:

1. The operation of the entire system of the snow sweeper is completely carried out in the cab, and the lifting, left and right deflection, cleaning and other operations of the roller brush are realized through buttons, which greatly improves the operating power. The roller brush has a two-way swing function, and the hydraulic drive can realize the left and right swing of the snow sweeper. The swing angle can be adjusted within the range of 0 ~ 30, thereby changing the direction of snow sweeping. The snow sweeper seeks wisdom and creates a magnificent view.

2. During the sweeping operation, the snow sweeper can adjust the roller brush 30 degrees left and right by rotating the oil cylinder according to the road conditions and snowfall conditions, which can ensure that when the unit moves forward, the snow to be swept is accumulated to the side of the road along the direction of the roller brush drive shaft tube, achieving a good sweeping effect.

3. There is a snow guard in front of the roller brush of the snow sweeper, which can effectively prevent the snow from splashing, avoid blocking the operator's field of vision, and ensure driving safety. On the other hand, the snow collected by the roller brush accelerates, lifts and throws out the snow.

4. The snow sweeper uses special sweeping materials with a long service life. The bristles are a mixture of polypropylene bristles and elastic steel wires, which have the advantages of wear resistance, elasticity, bending resistance, and no damage to the road surface.

When maintaining a snow sweeper, we should pay attention to the following points:

1. During operation, it is required to ensure that there are no large or heavy stones on the ground. Ensure that the snow sweeper will not damage the gears and blades of the machine due to stones.

2. Before the snow sweeper is operated, all parts of the sweeper equipment need to be disassembled and finished. During the finishing process, the bearing parts need to be modified with grease to ensure the normal operation of the bearings.

3. After the snow sweeper is operated, the dust on the snow sweeper should be cleaned in time, and the lubricating oil and grease should be replaced externally, and it should be parked in a dry environment for maintenance.

If you want to know more about snow sweepers, you can contact us. We are a snow sweeper manufacturer with rich industry experience.

Buy a small excavator, buy a second-hand small excavator, buy excavator parts, sell excavator parts, buy a small excavator

Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com