Use and maintenance of loader accessories
Posted: Jan 7th, '25, 21:32
1. Fast wear Due to the factors of new mechanical parts processing, assembly and adjustment, the friction surface roughness, small surface contact area, and uneven surface high pressure situation. The convex part of the machine during operation fits between the friction surfaces of the parts, wears metal fragments, and continues to participate in the friction as abrasive, but also accelerates the wear of the parts with the surface. Therefore, during grinding, there is a possibility of wear of parts (especially with the surface), and wear faster. Then, if the loader is overloaded, it may cause damage to the parts and cause early failure.
2 Poor lubrication As the new parts of the assembly, with a smaller gap, because of the assembly and other reasons, it is difficult to ensure the uniformity of the fitting gap, and the lubricating oil (grease) is not easy to even film on the friction surface to prevent wear. Thus reducing the lubrication performance, in the early abnormal wear parts. The exact cause of serious friction surface scratches or bite phenomenon, leading to failure.
3 Loosening Newly processed and assembled parts, there are geometric shapes and deviations in the initial period, due to the impact, vibration and other alternating loads, heat, deformation and other factors, plus excessive wear and other reasons, the original fastening parts are often loose.
4. Leakage occurs due to the influence of loose parts, vibration and heat combined with the machine, the sealing surface and pipe fittings of the machine will be written off leakage, casting, machining and assembly of other defects, debugging is difficult to find, but due to the vibration during operation, the effect of this defect is exposed, leakage (seepage) oil (water), so the running-in period is prone to leakage. Maintenance of loader and application
1. As a special vehicle engineering machinery factory operator should receive training, guidance of the machine, structure, performance of a full understanding, and obtain certain operation and maintenance
prescriptions for the operation of the machine. "Product manufacturer's maintenance manual" is necessary equipment, information operators before operating the machine, please be sure to read the "use three-dimensional maintenance instructions", the required operation and maintenance.
2 Please note that the workload during operation, half of the workload operation period should not exceed 60% of the rated load, and continuously arrange a long period of work to prevent the machine from overheating caused by the industry.
3 Pay attention to observe the instrument indication frequently, find abnormalities should be stopped at the time to be excluded, no cause is found, fail to stop the operation before, do not exclude. 4. Injection, oil, hydraulic oil, coolant, brake fluid and fuel oil (water) - and quality are regularly checked, and attention should be paid to checking the seal. If water is found to be lacking during the inspection, the cause should be analyzed. At the same time, the lubrication of the lubrication points should be strengthened. It is recommended that during operation, the lubrication points should be lubricated (except for special requirements).
5. Keep the machine clean, adjust, tighten the loose parts, prevent looseness, increase component wear, or cause part loss. 6. After the operation period, the machine should be mandatory for maintenance, inspection and adjustment work should be done, and pay attention to fluid replenishment. Loader accessories
multifunctional skid loader，Multifunctional skid steer loader attachments，Skid Steer Loader Attachments
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
2 Poor lubrication As the new parts of the assembly, with a smaller gap, because of the assembly and other reasons, it is difficult to ensure the uniformity of the fitting gap, and the lubricating oil (grease) is not easy to even film on the friction surface to prevent wear. Thus reducing the lubrication performance, in the early abnormal wear parts. The exact cause of serious friction surface scratches or bite phenomenon, leading to failure.
3 Loosening Newly processed and assembled parts, there are geometric shapes and deviations in the initial period, due to the impact, vibration and other alternating loads, heat, deformation and other factors, plus excessive wear and other reasons, the original fastening parts are often loose.
4. Leakage occurs due to the influence of loose parts, vibration and heat combined with the machine, the sealing surface and pipe fittings of the machine will be written off leakage, casting, machining and assembly of other defects, debugging is difficult to find, but due to the vibration during operation, the effect of this defect is exposed, leakage (seepage) oil (water), so the running-in period is prone to leakage. Maintenance of loader and application
1. As a special vehicle engineering machinery factory operator should receive training, guidance of the machine, structure, performance of a full understanding, and obtain certain operation and maintenance
prescriptions for the operation of the machine. "Product manufacturer's maintenance manual" is necessary equipment, information operators before operating the machine, please be sure to read the "use three-dimensional maintenance instructions", the required operation and maintenance.
2 Please note that the workload during operation, half of the workload operation period should not exceed 60% of the rated load, and continuously arrange a long period of work to prevent the machine from overheating caused by the industry.
3 Pay attention to observe the instrument indication frequently, find abnormalities should be stopped at the time to be excluded, no cause is found, fail to stop the operation before, do not exclude. 4. Injection, oil, hydraulic oil, coolant, brake fluid and fuel oil (water) - and quality are regularly checked, and attention should be paid to checking the seal. If water is found to be lacking during the inspection, the cause should be analyzed. At the same time, the lubrication of the lubrication points should be strengthened. It is recommended that during operation, the lubrication points should be lubricated (except for special requirements).
5. Keep the machine clean, adjust, tighten the loose parts, prevent looseness, increase component wear, or cause part loss. 6. After the operation period, the machine should be mandatory for maintenance, inspection and adjustment work should be done, and pay attention to fluid replenishment. Loader accessories
multifunctional skid loader，Multifunctional skid steer loader attachments，Skid Steer Loader Attachments
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com