Solution to breaker failure caused by failure of breaker accessories
Posted: Jan 12th, '25, 22:15
The working environment and working intensity of the breaker determine that its failure frequency is higher than that of other types of machinery. Even if there are higher requirements for maintenance and accessory performance, long-term, high-frequency, and high-load operations cannot avoid wear and failure. Once the accessories are damaged and fail, the operating state and working ability of the breaker will become unstable, and may even affect the normal use of the machine and the smooth progress of the engineering work.
If you do not want to delay the progress of the project too much, you can usually remove the worn parts through machining, and then design and install a part with a supplementary size at this part to restore the use function of this part. This method needs to consider whether the geometric size of the parts is reduced when repairing the parts, and whether its mechanical properties can meet the requirements for continued use after adding compensation parts. The newly added compensation parts should be reliably fixed to the original parts, and try to avoid the repair method of additional parts causing breaker failures.
For the damage of some wearing parts, or the damage and failure of standard parts and mass-produced parts with low replacement cost, these parts are mostly mass-produced products on the production line, with low production cost and selling price. The selling price of some products may be lower than the cost of repair and reprocessing, so the method of replacing parts can be adopted.
Some parts are designed with the possibility of wear and tear in mind. By adjusting the position of parts or the gap, the use function of the transmission structure can be restored. This adjustment method is usually used in occasions where the wear or deformation of parts is not too serious.
Mini crawler excavator，Mini crawler excavator attachments，Excavator attachments，Crawler excavator，Mini excavator purchase
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
If you do not want to delay the progress of the project too much, you can usually remove the worn parts through machining, and then design and install a part with a supplementary size at this part to restore the use function of this part. This method needs to consider whether the geometric size of the parts is reduced when repairing the parts, and whether its mechanical properties can meet the requirements for continued use after adding compensation parts. The newly added compensation parts should be reliably fixed to the original parts, and try to avoid the repair method of additional parts causing breaker failures.
For the damage of some wearing parts, or the damage and failure of standard parts and mass-produced parts with low replacement cost, these parts are mostly mass-produced products on the production line, with low production cost and selling price. The selling price of some products may be lower than the cost of repair and reprocessing, so the method of replacing parts can be adopted.
Some parts are designed with the possibility of wear and tear in mind. By adjusting the position of parts or the gap, the use function of the transmission structure can be restored. This adjustment method is usually used in occasions where the wear or deformation of parts is not too serious.
Mini crawler excavator，Mini crawler excavator attachments，Excavator attachments，Crawler excavator，Mini excavator purchase
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!