How to deal with high water temperature in small excavators

[BONOVO]

The small excavator has a higher water temperature and no cooling defect. Let's take a look at the function of the modification together, I hope you can learn.
1. Check whether the radiator of the small excavator is blocked. If the air conditioning temperature is too high, turn off the air conditioning and check whether the temperature drops sharply. If so, blow the radiator. Seal the water tank with a sponge and check whether the filter has dirt or dirt. In addition, reduce the flow, the engine load capacity is small, and the temperature may not be so high.
2. In addition, remove the thermostat of the small excavator or check whether the thermostat is installed. There is also a screw to loosen the fuel tank to increase the water temperature of the tire excavator.
3. It is easy to cause large natural air conditioning loads and natural high temperatures of tire excavator engines. Don't worry, if the engine goes there in the summer, disassemble its own air pump, spray the cleaning tank, it's useless, it's easy to heat other things, don't install the thermostat when trying to open the hood. You can also install a small 24-volt fan outside the radiator. It effectively dissipates heat. Tire excavators are relatively strong and in a suffocating state during operation, so they are easy to heat up.
4. You can also slightly replace the pump pulley. Or replace it with a low-power compressor. Remove the inside of the water tank, clean the outside, remove the thermostat, flush the water tank and the air conditioning condenser in front of the washing machine, be careful not to screw the screws, press the button to check the coupler, it assumes you are particularly hot, easy to rotate.
If it is suggested that the small excavator should not only check all aspects of the tire excavator, but also check other aspects of the problem, the drill can be checked together and solved together. In short, the problem has already occurred, and we have saved a lot of effort. In short, the drilling machine generally has problems, or there may be multiple small excavators, and I have a friend who can quickly solve the unsolvable problems by consulting professionals, on-site tire excavator service, professional advice you do not blindly solve the problem yourself, which will usually be counterproductive. Please pay attention to tire excavation repair, website, if the tire excavator repair is not possible, and so on.

Mini excavator
Reasons for wear of the cylinder of the small excavator
One is that the filtering ability of the air purifier is reduced or the inside of the air channel cannot be sealed. That is to say, considerable wear and tear will occur by inhaling dust in the air. For example, an air purifier obtained from a function may have a filtration rate of 99% or more. On the contrary, only 50% to 70% of the dust can be removed. I am not very good. In addition, the cylinder device uses a wet cylinder sleeve, which means that the cylinder line and the axis of the shaft are not aligned due to the incorrect cylinder device. Many waterproof rubber devices on the cylinder are used to place this coil above the groove on the outer wall of the cylinder. In this way, the sealing effect of the coil can be improved, small excavators can be prevented, or the rubber sleeve can be tightened. 1. If the amount of lubricating oil is small, the sulfur content of the used oil increases, that is, the blocked part of the journey at the discontinuity point may be severely corroded and corrosive wear may occur. If the polishing and polishing droplets are polished, sharp abrasive grinding tends to occur in a part of the cylinder sleeve.

keywords：multifunctional skid loader，Multifunctional skid steer loader attachments，Skid Steer Loader Attachments

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com