It is an indispensable equipment in road engineering construction. It can be said that the quality of the grader's function will directly affect the quality of the project. The engine is the key part of the grader, and it must be maintained. Especially in winter when the temperature is low, it is difficult to start the engine, but if it is well maintained, the engine can be kept in good condition. So, how to maintain the engine in winter? The following grader parts sales will introduce it to you.
1. Engine preheating. The engine must be preheated before starting. It can only be started when the temperature reaches 30 to 40 degrees. Generally, the engine has a preheating device. If not, you can remove the air filter and use a blowtorch to heat the air intake after driving the engine. This also has a preheating effect.
2. After starting the engine, do not run it at high speed all at once. Run it at idle speed for 4 minutes before starting. Make sure that the engine oil level is normal and the lubrication is normal.
3. After stopping, wait for a few minutes to check the engine oil. Make sure that the engine oil quality is good. If impurities are mixed in the engine oil, replace the engine oil and oil filter. If the temperature is below 0 degrees Celsius, the cooling water must be drained after the machine is shut down, otherwise the equipment is prone to freezing and cracking.
In short, the grader must be well maintained on a daily basis. If there are any problems with the engine during use, you can consult Xuzhou Haihang Engineering Machinery Co., Ltd.
multifunctional skid loader,Multifunctional skid steer loader attachments,Skid Steer Loader Attachments
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com