The contents of regular maintenance and maintenance of micro excavator
Posted: Oct 24th, '24, 21:44
Micro excavator sometimes jam up during construction, because the instantaneous speed is too large, the gate valve will be blocked, and the internal structure will leak, resulting in common problems, reducing efficiency and reducing service life. When repairing the hydraulic transmission system of excavator , some abnormal signs often occur. Therefore, daily maintenance is very important, and we will talk about it briefly.
1, before starting the hydraulic transmission system, please carefully explore whether the limit part and tee are loose and whether the pipeline is deformed or damaged.
2, before the first hydraulic cylinder, try to leak oil first to prevent the hydraulic cylinder from being destroyed by the actual pneumatic operation.
3, when the hydraulic cylinder starts, it can continue to work (novel is in cold areas) to test whether it is flexible. Before you start the actual operation, make sure that everything is normal and there is no noise.
4, when the working pressure of the hydraulic transmission system multiway valve manufactured by the machine is higher than or below the limit value.
5, after the hydraulic transmission system is in stable operation, not only pay attention to the temperature of water, working pressure and noise, but also pay attention to the operation of hydraulic cylinder, oil motor, hydraulic reversing valve and gate valve.
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
1, before starting the hydraulic transmission system, please carefully explore whether the limit part and tee are loose and whether the pipeline is deformed or damaged.
2, before the first hydraulic cylinder, try to leak oil first to prevent the hydraulic cylinder from being destroyed by the actual pneumatic operation.
3, when the hydraulic cylinder starts, it can continue to work (novel is in cold areas) to test whether it is flexible. Before you start the actual operation, make sure that everything is normal and there is no noise.
4, when the working pressure of the hydraulic transmission system multiway valve manufactured by the machine is higher than or below the limit value.
5, after the hydraulic transmission system is in stable operation, not only pay attention to the temperature of water, working pressure and noise, but also pay attention to the operation of hydraulic cylinder, oil motor, hydraulic reversing valve and gate valve.
Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com