Loader daily maintenance method

[BONOVO]

In order to loader the need for daily cleaning and maintenance, let's take a look at how to carry out daily maintenance!

1. Winter vehicle use is relatively difficult, it is recommended that each start should not exceed 8 seconds, if can not start, should loosen the start switch, stop for 1 minute before the second start. After the engine starts, idling for a period of time (it should not be too long, too long will form carbon deposits on the inner wall of the cylinder, there will be a cylinder pulling phenomenon), one to charge the battery, the other to make the water temperature reach 55 ° C and the pressure gauge reach 0.4Mpa, and then start driving.

2. The general temperature is below 5 ° C, the engine should be heated before starting water or steam for preheating, to be preheated to more than 30~40 ° C and then start (the temperature of the main preheating cylinder, and then heating the temperature of the fog diesel, because the general diesel engine is pressure combustion).

Full loader operation is allowed when the water temperature of the diesel engine is higher than 55 ° C and the oil temperature is higher than 45 ° C; The water temperature and oil temperature of the engine during operation should not exceed 95 ° C, and the oil temperature of the torque converter should not exceed 110 ° C.

4. When the temperature is below 0 ° C, the cooling water in the water tank, engine, oil cooler and torque converter oil cooler should be released after work every day to avoid freezing and cracking; There is water vapor in the cylinder, which is often discharged to prevent freezing, resulting in brake failure. If antifreeze has been added, do not release.

5. If the storage vehicle stops using for more than half a month, the engine must be started every 15 days and run for a period of time to charge the battery. If the time is too long, please remove the battery and use the charger to charge (the same is true for the vehicle to be sold at the dealer), and move appropriately to change the pressure part of the tire to prevent tire deformation; The vehicle needs to be parked for more than two months, and the negative battery must be disconnected or removed.

6. The use of fuel oil, lubricating oil coolant and auxiliary materials used in diesel engines is as follows: the diesel of diesel engines uses -10# light diesel, and the fuel in cold areas uses -35# light diesel; The engine oil of the diesel engine is CD grade (for other oils and their usage, please refer to the Degong Product Operation and Maintenance Manual and the Diesel Engine Operation and Maintenance Manual).

7. When the temperature is below 0 ° C, the concentration of antifreeze should be checked regularly, and the use of untreated water as the engine coolant is prohibited.

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com