Simple installation, easy operation: excavator with lawn mower use tutorial

[BONOVO]

In the work of large-scale lawn maintenance and waste land weed cleaning, the excavator has become a helpful assistant with its efficient operation ability. It is easy to install, the operation process is not complicated, and the following is a detailed introduction to its use of tutorials.

1. Preparation before installation

(1) Confirm the suitable model

Different types of excavators correspond to different specifications of lawn mowers. Before purchasing, be sure to carefully check the brand, model and working parameters of the excavator to ensure that the selected mower matches it. For example, the common Caterpillar 320 excavator has specific requirements for the applicable mower power and connection size. This step is the basis for ensuring the smooth follow-up installation and use, and "excavator with lawn mower adaptor" is the key point.

(2) Check the integrity of the components
After receiving the mower, check all the parts thoroughly. Including whether the cutting blade is sharp without defects, whether the transmission chain is broken or rusty, whether the hydraulic pipeline is damaged, and whether the small parts such as the connection pin are complete. The damage or absence of any part may affect the installation process and the subsequent normal use of the mower, which is related to the importance of "inspection of excavator parts of the mower".

Second, installation process

(A) Connect the hydraulic pipeline

First of all, find the backup hydraulic interface of the excavator, which is generally located on the side of the forearm of the excavator. The hydraulic tubing of the lawn mower is connected with the hydraulic interface of the excavator. Pay attention to the cleanliness of the interface to avoid impurities entering the hydraulic system, resulting in failure.

Connect the tubing in the correct direction to ensure that the tubing is not twisted or twisted. After the connection is complete, use a special pipe clamp to secure the tubing to prevent the tubing from falling off during the working process. This link has high accuracy requirements for "hydraulic pipeline installation of excavator accessories and lawn mowers".

(2) Mechanical connection

The mower's mounting frame is aligned with the connecting part of the front end of the excavator's forearm, and the two are connected through a pin. The pin should be inserted in place and the cotter pin installed to prevent the pin from slipping out.

Adjust the Angle and position of the mower so that it can achieve the best cutting effect when working. Generally, the lawn mower and the ground maintain a certain tilt Angle, generally between 15° -30 °, and the specific Angle can be fine-tuned according to the actual terrain and mowing needs, which is the key point of "excavator with lawn mower mechanical connection adjustment".

Third, the use of operation

(1) Check before starting

Check again whether the installation part is firm and whether the hydraulic pipeline leaks. You can start the excavator, let the forearm do some simple actions, and observe whether there are signs of loosening in the connection part of the lawn mower.

Check whether the blade of the mower is firmly installed and whether it is deformed. Ensure that there is no debris around the blade, which is a necessary step for "checking the excavator before starting the lawn mower".

(2) Operation procedures

Start the excavator and extend the forearm into position to bring the mower close to the lawn or area of weeds that need to be cleared.

Slowly operate the control handle of the excavator to control the mower's descent until the blade touches the turf. Do not drop the blade too fast to avoid damage to the blade or excessive impact on the ground.

Turn on the hydraulic motor of the mower to start the blade spinning. According to the height and density of the grass, adjust the moving speed and cutting depth of the arm of the excavator. Generally speaking, when the grass is higher and denser, the moving speed can be slowed down appropriately, and the cutting depth can be deepened. When the grass is shorter and sparser, it can speed up the moving speed and reduce the cutting depth, which is the embodiment of the "excavator is a lawnmower operation method and skills".

In the cutting process, always pay attention to observe the working state of the lawn mower. If you find that the blade is stuck, there is abnormal noise or the pressure of the hydraulic system is unstable, you should stop the operation immediately, check the cause and remove the fault before continuing to work.

Fourth, maintenance after use

(1) Cleaning and maintenance

After use, park the mower in a flat and safe place. Clean up the weeds, dirt and other debris wrapped on the blade, you can use a brush or high pressure water gun to wash, but be careful to avoid water into the motor or hydraulic system.

The various components of the lawn mower are cleaned, especially the transmission chain, connection pin and other parts, to keep them clean and dry, and to prevent rust, which belongs to the important content of "cleaning after the use of the excavator lawnmower".

(2) Inspection and maintenance

Check the blade wear condition. If a blade is seriously worn or damaged, replace it in time. Ensure the sharpness of the blade to ensure the cutting effect of the next use.

Check the oil level of the hydraulic system, such as the oil level is too low, timely supplement the hydraulic oil. At the same time, check whether the hydraulic oil is clean, if there are impurities or deterioration, the hydraulic oil should be replaced in time, which is related to the key point of "maintenance of the hydraulic system of the excavator."

The various connection parts are tightened to prevent the connection from loosening due to vibration during use.

Through the above detailed installation and use of the tutorial, master the "excavator lawn mower installation steps" and operation skills, with good post-use maintenance, you can make the excavator lawn mower efficient and stable for all kinds of grass cutting work service, greatly improve work efficiency, save labor and time costs.