How to prevent injuries caused by moving parts of loaders?

[DIG-DOG]

All moving parts of the loader that are liable to cause injury accidents should be closed or shielded, or other protective measures should be taken to avoid contact with the operator. Based on the plane the operator is standing on, all kinds of transmission devices with a height of less than 2m must be equipped with protective devices, and material conveying devices and belt transmission devices with a height of more than 2m should be equipped with protective devices.



In order to avoid extrusion injury, the distance between the linear moving parts of the loader or between the linear moving parts and the stationary parts, including walls and columns, must comply with the provisions of the relevant safety distance, and the mechanical design should ensure that the body parts that should not be passed cannot be passed. The loader shall set up a reliable limit device according to the need, the loader must set up an overload safety device for the parts that may be damaged due to overload, and the high-speed rotating moving parts should carry out the necessary static balance or dynamic balance test.



The moving parts of the loader with inertia impact must take reliable buffering measures to prevent injury accidents caused by inertia.



Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at https://www.dig-dog.com/

contact # : +86 158 6218 2088

email : sales@bonovogroup.com