How should the excavator produced by the micro excavator manufacturer be repaired

It is not allowed to publish illegal or illegal content, otherwise it will be blocked.
User avatar
BONOVO
Posts: 460
Joined: Oct 17th, '24, 02:50
Location: China
Contact:

How should the excavator produced by the micro excavator manufacturer be repaired

Post by BONOVO »

How to repair the fault of the excavator produced by the micro excavator manufacturer?

1. Transpiration apparatus

The evaporator circulates the liquid refrigerant through an expansion valve to absorb the heat of the air inside the car, and uses a transpiration fan to drive cold air into the car.

2. Expansion valve

The expansion valve depresses the high-temperature and high-pressure refrigerant liquid to become a low-temperature and low-pressure mist refrigerant (that is, the high-pressure side is separated from the low-pressure refrigerant). Simply transpiration into the steamer

3. Temperature sensor

Investigate the temperature of the evaporator to prevent the evaporator from freezing, and manipulate the suction of the compressor to bring the room temperature to a certain condition.

4. Inside air filter

Both internal and external dust and other foreign objects are blocked. Note: Should be cleaned or replaced regularly (about 6 months).

5. Compressor:

After being driven from the engine belt, the low temperature/low pressure refrigerant that is steaming from the evaporator is compressed into high temperature and high pressure gaseous refrigerant and transported to the condenser.

6. Condenser repair excavator

The high temperature/high pressure refrigerant gas sent from the compressor is converted into a high temperature and low pressure refrigerant liquid.

When the chip is tilted or damaged, or the exterior is contaminated with foreign matter (mud, grass, etc.), abnormal high pressure will occur, which will cause the cooling function to decrease.

The repair methods of mini excavator air conditioning problems are these, and I hope to help you.

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
Post Reply