Hammer Hose

It is not allowed to publish illegal or illegal content, otherwise it will be blocked.
User avatar
BONOVO
Posts: 460
Joined: Oct 17th, '24, 02:50
Location: China
Contact:

Hammer Hose

Post by BONOVO »

As a common equipment, the breaker will not have any major problems in normal use, but if it is not used for a long time, it will have a certain impact on its performance, especially in the case of improper storage. Therefore, it is very necessary to correctly understand the storage precautions of the breaker equipment. Introduction to the long-term storage method of the breaker: ① It should be parked in a dry room during storage. If it has to be parked outdoors, a flat ground should be selected and covered with wooden boards. Cover it with a cover cloth after parking. The arrangement and layout of the parking lot during storage should ensure that the entry and exit of any machine is not affected by other machines. ③ When storing, the fuel control lever of the machine should be placed in the idle position, and each joystick should be placed in the neutral position. ④ Before long-term storage, the machine must be maintained, damaged parts must be repaired, and it must be thoroughly cleaned to keep it in good technical condition. ⑤ Before storage, the battery should be removed and placed in a dry and antifreeze place. The surface should be kept clean and dry. It is strictly forbidden to place conductive objects on the battery. ⑥ Before storage, the cooling water in the engine should be drained and the engine oil should be replaced. During the downtime, the engine should be started once a month to make the machine travel a short distance so that a new oil film can be established at the lubrication points of each part to prevent rust. It should be noted that the cooling water should be filled before starting and the cooling water should be drained at the end.
In addition, when the crusher is stored in a low temperature environment, it must be lubricated with a low viscosity grease before storage, so that the internal parts of the crusher are well lubricated to prevent serious friction between the parts and damage to the parts.
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
Post Reply