How do we use the excavator?

[DIG-DOG]

What are the important parts of an excavator?
The three major parts of an excavator are the engine, hydraulic pump and distribution valve.
The materials excavated by the excavator are mainly soil, coal, silt, pre-loose soil and stone, etc. From the development of engineering machinery in recent years, the development speed of excavators is relatively fast, and excavators have become one of the most important engineering machinery in engineering construction. The three most important parameters of an excavator are working weight (mass), engine power and bucket capacity.
How to operate an excavator correctly?
1. Before the excavator starts or the operation begins, a signal should be issued; after the engine is started, it is strictly forbidden to stand in the bucket, dipper, crawler, and hangar.
2. No one is allowed to stay in the excavator operation area. It is strictly forbidden for unrelated personnel to enter the excavator operating room. No one is allowed to get on and off the machine or transfer items. No items that hinder operation shall be placed. Repairs and maintenance are not allowed during work. .
3. The working position must be flat and fixed. Before work, the crawler should be braked, the tire excavator should be supported on the outriggers, the tires should leave the ground, the direction of the body should be consistent with the extension direction of the excavation surface, and the shovel should not be too biased. The bucket depth should not be too strong during operation.

4. When excavating stone-containing earthwork on a high slope working surface, larger stones and debris should be removed. If the soil cannot collapse naturally after being dug into the air, it needs to be handled manually. It is strictly forbidden to use a bucket to smash the suspended soil.

How to start the excavator?

1. The engine start switch is the position where the key is inserted to start the excavator: it means start, start; ON means connected and turned on. When the key is turned here, the circuit of the excavator is connected; OFF means disconnect and close, which means that when the key is turned here, the entire circuit of the excavator is disconnected, and the key can be inserted and removed; HEAT means preheating. When the temperature is low, turn the key here to preheat and use.

2. The instrument panel can feedback the status information of the excavator at any time, such as fuel quantity, cooling water temperature, oil temperature, engine speed, working mode, time, equipment maintenance information, fault query, etc. Of course, the instrument panel and display content of each brand model are different, with LCD display and digital display.

The mechanical matching of the excavator is good, and the hydraulic system has also been greatly improved. Excavators are widely welcomed by the market because they are flexible, durable, value-preserving and low-cost during work. In order to meet these growing demands, Jiangsu SAIC Heavy Industry Technology Co., Ltd. has a variety of excavator products, and they are all more effective, reliable and consistent.

Buy a small excavator, buy a second-hand small excavator, buy excavator parts, sell excavator parts, buy a small excavator

Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com