Explanation of the installation method of excavator wood grabber

[BONOVO]

1. Preparation

Before installing the excavator log grapple, make sure you have the following tools and materials ready:

Excavator log grapple

Hand tools (wrench, ring lock, etc.)

Safety gear (gloves, goggles, ear plugs)

Excavator operator's manual

Pressure gauge (if required)

2. Determine fit

First, make sure the excavator log grapple is compatible with your excavator. Check if the specifications of the log grapple and the hydraulic system of the excavator match. If you are unsure, refer to the specification sheet of the excavator and log grapple or consult the manufacturer.

3. Excavator operator's manual

Read the excavator's operator's manual carefully to understand the specific requirements and hydraulic system parameters for installing the log grapple. Make sure you follow the manufacturer's recommendations and guidelines to ensure safety and efficiency.

4. Disconnect the hydraulic system

Before starting to install the log grapple, first turn off the excavator's engine and disconnect the hydraulic system. This can be achieved by opening the excavator's hydraulic system shut-off valve.

5. Cleaning work

Make sure the connection parts and hydraulic interfaces of the excavator wood grab are clean and free of debris or corrosion. Use a detergent and cloth to clean these parts.

6. Install the wood grab

Hang the excavator wood grab to the arm of the excavator, making sure the connection points are correct. Usually, the wood grab is fixed with bolts or pins. Use the appropriate hand tools to tighten the connection parts. Make sure the bolts or pins are tightened firmly, but not too tight.

Explanation of the installation method of the excavator wood grab

7. Connect the hydraulic system

Connect the hydraulic line of the excavator wood grab to the hydraulic system of the excavator. Make sure to match the interface of the hydraulic line correctly and make sure that the tightening screws are firm.

8. Pressure test

Before starting the excavator, perform a simple pressure test. This can be done by connecting a pressure gauge. Make sure the pressure of the hydraulic system is within the normal range.

9. Safety check

Before starting the excavator, perform a comprehensive safety check. Make sure the wood grab and hydraulic system are installed correctly, the bolts or pins are tight and there are no loose parts. Also, make sure all safety equipment is worn.

10. Start the excavator

When everything is ready, start the excavator and gradually increase the pressure of the hydraulic system to ensure that the wood grab operates normally without abnormal noise or vibration.

Mini crawler excavator，Mini crawler excavator attachments，Excavator attachments，Crawler excavator，Mini excavator purchase

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com