Can milling and digging machine mill reinforced concrete? What about the yield?

[DIG-DOG]

The application of milling machine is very wide, can be used in tunnels, ditches, municipal pipeline excavation; Highway pavement crushing, mining, rock and frozen soil excavation can also be used; Open pit coal mine excavation, surface new and steel industry, forestry and other construction fields.

In the medium and low hardness of rocks such as weathered rock, tuff up to 25 ~ 40m3/h (with the density of the rock, the degree of fragmentation is different), can also be milling and digging without reinforcement or a small amount of reinforcement concrete, the use of 300 tons of excavatoron the milling machine, you can easily milling and digging 30mm diameter of reinforcement concrete.

Milling machine instead of construction, to avoid due to vibration caused by rock strength reduction, structural loosening, local rupture and other adverse conditions. It is beneficial to protect the original self-supporting ability of rock mass and is not easy to cause large area collapse. Especially in the tunnel construction operation, it can replace the very expensive tunnel boring machine and shield machine and other machinery, and greatly reduce the construction cost; The milling machine is very effective in the following rock mining operations: low hardness rock, weathered rock, high hardness but layered rock, the milling rate can reach 80 to 120 tons per hour (depending on the hardness of the rock); Milling and digging machine can replace excavatorconstruction well, and can protect the environment well.

There are two basic types of milling and digging machines: lateral and longitudinal, which can be installed on any type of hydraulic excavator, using the hydraulic circuit of the hydraulic crushing hammer or hydraulic pliers for easy installation. Its super strong shell and gearbox design, long service life. The full range of working Angle can realize its own 360 degree rotation, convenient maintenance, no need to hit butter and fill nitrogen, and no special requirements for the maintenance of the excavator.

Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com