The real operation of the forklift must be remembered!

[DIG-DOG]

Pedal operation essentials

Step gently to lift, smooth good excessive,

Keep your feet on the pedal, keep your heels on the ground,

Stop the car, hit the clutch, then hit the brake,

Remember that order. You can't beat fire.

Bullet train parking tips

The seat should be comfortable, the handle pedal is clear;

The bullet train lifts the fork and raises the door frame, starts the light and honks the horn;

Slow loose clutch oil is lightly added, the direction of advance should be slow;

Stop first step on the clutch, neutral at the same time step on the foot brake;

Pay attention to each stop, the direction of stopping back to hit straight;

Lean forward fork teeth down to the ground, remember to turn off the handbrake.

Steering wheel operation

Slow and quick, continuous,

Call as many times as you want. Call back the same.

With each stop, the wheels are righted.

Tips for subdivision around eight characters

Start to lift fork after tilting frame, moving honk light to play;

Library front line 30 degrees, right light back to see the far column;

The rear of the car retreated into the gate of the pile, and the direction was beating without stopping;

Gently adjust the left corner to the left, full teeth into the car wheel is;

Out of the warehouse light to the left pile, fine tuning direction to the left;

Body over the pole column busy back to the right, inclined out of the pile door good upper;

Side out of the door of the warehouse, along the line of the edge to go forward;

Reverse back to see 32, turn the head to see the column cut;

The rear of the car retreated to the gate of the pile, and did not stop beating in the direction;

Gently adjust the right side to the right side, all teeth into the Kuqa back;

Out of the warehouse light to the right pile, fine tuning direction to the right turn;

Busy back to the pole position, inclined out of the pile door to see the inner circle;

The front wheel is attached to the inner ring, and the direction is adjusted slowly.

After walking the two round wipe pile out, back to the body to go the middle road;

Turn and reverse to see the gourd, go straight into the big belly;

The center point is attached to the outside line, slowly and continuously adjusted in the first;

After the two garden post pile out, back to the library callback is not relaxed;

The storage fork is all inside, and the parking direction is positive;

Forward tilting fork teeth drop to the ground, empty whistle pull brake.

I fork load key

Straight line refueling slow turn, no half joint right Angle turn,

Close to the cargo pile prefabricated move, vertical gantry height adjustment,

Loading and unloading handle, fork flat straight forward prohibited,

The fork teeth should be smooth, and the drag plate should not be uniform.

I remember the order to go, the second board raised a head.

Comprehensive training tips

Lift the fork after ignition, start the horn,

Stop straight, turn where you want,

Enter the big garden arc, the direction should be slow,

Forward by the inner circle, back by the outer circle,

I-word sequence, loading and unloading handbrake,

Close first vertical, then high and low,

Insert fork touch plate, lift and lean back,

Drive away from the stack area and adjust the fork height.

Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com