Excavator under the plate car turned over, ask the great God to analyze the reason

It is not allowed to publish illegal or illegal content, otherwise it will be blocked.
User avatar
DIG-DOG
Posts: 460
Joined: Oct 20th, '24, 22:38
Location: China
Contact:

Excavator under the plate car turned over, ask the great God to analyze the reason

Post by DIG-DOG »

How to avoid similar accidents?

Small series of prevention of excavatoraccidents:

Warning cases and preventive measures of off-board car accidents

I hope it was helpful

excavatoron the plate car: hit the next worker dead

On the house construction site, because there is no special inclined plate, two fixed cement shaped plates (17cm wide, 1.6m long and 1.45m long) are used to load the excavatoronto the trailer. Next to the trailer, an operator was cleaning up the site, picking up the building materials scattered on the ground.

accident

The following accident occurred

The hydraulic excavatorwas about to board the trailer platform when it lost its balance and tumbled from the side of the auxiliary seat. The operator of the hydraulic excavator jumped out, so it's okay. But the crew, who were cleaning up next to the trailer, died when they were crushed by a hydraulic excavator.

evade

Key points to avoid accidents

(1) To use a inclined plate suitable for handling vehicles or construction machinery, set the Angle of the inclined plate to less than 15 degrees.

(2) In addition to prohibiting others from entering the operation area, the site also needs operation commanders.

(3) Discuss the order and method of work in advance, and then clearly inform the relevant personnel.

excavatoroff the car: the driver is pressed

The ground at the construction site was uneven and the excavatorwas about to be unloaded from the trailer. Two aluminum slants were placed from the ground to the trailer platform.

accident

The following accidents occurred

The ramp suddenly disengaged, the excavatortoppled over, and the driver was pinned underneath.

evade

Key points to avoid accidents

(1) When unloading the heavy machine, it should be carried out on a flat and solid site.

(2) To use a inclined plate suitable for handling vehicles or construction machinery, set the Angle of the inclined plate to less than 15 degrees.

Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com
Post Reply