Run-in period for operating small loader accessories?

[BONOVO]

Newly bought small loader need to be run in order to better use, so how should we run and maintain our small loaders? Let's talk about running-in of small loaders.

Strengthen lubrication. The lubrication position of each part of the small loaderthat needs to be lubricated should be strengthened. It is recommended that in the running-in process of small loaders and each part, each class requires the addition of grease in each lubricating position that needs to be lubricated, which can protect the parts. Monitoring of various oils. Always check the quality of lubricating oil, coolant, hydraulic oil, brake fluid and fuel water level.

Check the sealing performance of small loader. Pay attention to check whether the sealing performance of the small loaderis stable. If too little fuel is found in the process of checking the small loader, the cause of too little fuel should be analyzed. The workload should not be too large. Be sure to pay attention to the workload of the small loader parts during run-in. During the run-in period, more than half of the working load should not exceed 60% of the specified working load. In addition, a suitable workload should be arranged for small loaders to avoid unnecessary overheating of the site caused by continuous operation of small loaderfor long periods of time.

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.bonovogroup.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com