How to clean and maintain snow removal equipment?

[DIG-DOG]

First, cleaning work
Remove snow and debris

Remove snow, ice and road debris from the equipment immediately after each use. These residues not only add weight to the equipment, but may also cause corrosion or blockage of mechanical components.

Use a special shovel or high pressure water gun (pay attention to the appropriate temperature to avoid freezing and cracking equipment) to clear the snow and ensure that the surface of the equipment is clean and free of residue.

Clean the body and accessories

Clean the equipment body and accessories regularly to remove oil, dust and other impurities. You can use a mild cleaning agent with a soft cloth or sponge to wipe, avoid the use of corrosive chemicals.



Pay special attention to cleaning key components such as blades and buckets to ensure their sharpness and efficiency.

Check and clean the hydraulic system

The hydraulic system is the core part of the snow removal equipment of the sweeper and must be kept clean. Regularly check whether the hydraulic oil is clean, if there are impurities should be replaced in time.

Clean the hydraulic tank and filter to ensure smooth oil circulation.

2. Maintenance work
Check mechanical parts

Regular inspection of the various mechanical components of the equipment, such as bearings, chains, gears, etc., to ensure that they operate flexibly and without abnormal wear.

Replace badly worn parts to prevent penny wise and pound foolish, which will affect the overall performance.

Lubrication and maintenance

According to the requirements of the equipment manual, the parts that need to be lubricated are regularly lubricated. Use suitable lubricants or greases to reduce friction and wear.

Check and adjust the fasteners to ensure that the structure of the equipment is stable and not loose.

Electrical system inspection

Check whether the electrical circuit is intact, without damage or aging.

Ensure that the control switch, indicator light and other electrical components work properly, if there is a fault should be repaired or replaced in time.

Storage and protection

During the non-use season, the snow removal equipment should be stored in a dry and ventilated indoor environment to avoid sun and rain and moisture corrosion.

Before storage, equipment should be thoroughly cleaned and maintained to ensure that there is no residue. At the same time, the vulnerable parts can be treated with rust prevention to extend the service life.

Third, precautions
When cleaning and maintenance work, be sure to cut off the power supply or turn off the engine to ensure personal safety.

Use dedicated tools and accessories for maintenance to avoid equipment damage caused by improper tools.

Follow the equipment instructions and manufacturer's recommendations for maintenance and maintenance to ensure correct operation.

Regularly invite professional and technical personnel to conduct a comprehensive inspection and evaluation of the equipment to find and solve problems in a timely manner.

Choose DIG-DOG for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!

for more info just visit our website at www.dig-dog.com
contact # : +86 158 6218 2088
email : sales@bonovogroup.com